vs.

      John Deere 770D vs. New Holland RG140.B

      21 reasons to buy John Deere 770D:

      Steerage

      Turn radius 7 m and 7250 m 100 % less or 7243 m

      Operation

      Rear axle standard operating weight 10959 kg and 9707 kg 11 % more or 1252 kg
      Generator current strength 100 amperes and 70 amperes 30 % more or 30 amperes
      Front axle maximum operating weight 7185 kg and 3700 kg 49 % more or 3485 kg
      Rear axle maximum operating weight 14587 kg and 9807 kg 33 % more or 4780 kg
      Fuel Capacity 401.2 l. and 341 l. 15 % more or 60.2 l.
      Cooling system fluid volume 49.2 l. and 40 l. 19 % more or 9.2 l.
      Rear differential/final drive fluid volume 36 l. and 29 l. 19 % more or 7 l.
      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.
      Each tandem case fluid volume 75.7 l. and 29 l. 62 % more or 46.7 l.
      Front axle standard operating weight 3860 kg and 3700 kg 4 % more or 160 kg

      Motor

      Effective speeds output 5-6 138 kW and 104.4 kW 24 % more or 33.6 kW
      Effective speeds output 7-8 160.3 kW and 104.4 kW 35 % more or 55.9 kW
      Maximum power 160.3 kW and 104.4 kW 35 % more or 55.9 kW
      Effective drives torque 7-8 1223 Nm and 657.6 Nm 46 % more or 565.4 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.6 km/h and 30 km/h 28 % more or 11.6 km/h

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Circle

      Right maximum radius outside tyres 2080 mm and 2174 mm 4 % less or 94 mm
      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm

      6 reasons to buy New Holland RG140.B:

      Operation

      Hydraulic system fluid volume 180 l. and 53 l. 71 % more or 127 l.
      Transmission fluid volume 25 l. and 22.7 l. 9 % more or 2.3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 191.2 l/min and 207 l/min 8 % less or 15.8 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 41.6 km/h 3 % more or 1.3 km/h

      Circle

      Maximum radius outside left tyres 1978 mm and 2100 mm 6 % less or 122 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Blade base 2568 mm and 2562 mm
      Between tyres width 2510 mm and 2512 mm
      Dual axis wheelbase 1540 mm and 1594 mm
      Wheelbase 6120 mm and 6219 mm
      Height to cab upper part 3180 mm and 3140 mm
      Dimensional length 8804 mm and 8521 mm

      Operation

      Overall standard operating weight 14819 kg and 13506 kg
      Total maximum operating weight 21772 kg and 13506 kg
      Tyre size 14.00R24 Radial PR and 14x24 12 layers G2
      Operating voltage 24 V and 24 V

      Motor

      Model 6081H and Cummins 6A 5.9
      Manufacturer John Deere and BT
      Cylinders number 6 and 6
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump with load sensing
      Overflow valve pressure 18960.6 kPa and 17926.4 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type Powershift transmission with direct drive and powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 25 degrees
      General fluctuations 32 degrees and 20 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Mouldboard height 610 mm and 622 mm
      Left lateral displacement 680 mm and 533 mm
      Lateral right shift 680 mm and 686 mm
      Mouldboard width 3660 mm and 3658 mm

      Circle

      Diameter 1520 mm and 1753 mm
      Rotating 360 degrees and 360 degrees
      Blade tilt front angle 42 degrees and 42 degrees
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2568 mm 8. Blade base 2562 mm
      1. Dimensional length 8804 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2512 mm