vs.

      John Deere 770D vs. Volvo G730 VHP

      11 reasons to buy John Deere 770D:

      Operation

      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.
      Generator current strength 100 amperes and 75 amperes 25 % more or 25 amperes
      Rear axle standard operating weight 10959 kg and 10957 kg 0 % more or 2 kg
      Fuel Capacity 401.2 l. and 378.5 l. 6 % more or 22.7 l.
      Cooling system fluid volume 49.2 l. and 47 l. 4 % more or 2.2 l.

      Motor

      Effective drives torque 7-8 1223 Nm and 964 Nm 21 % more or 259 Nm

      Gear box

      Maximum reverse gear 41.6 km/h and 32.8 km/h 21 % more or 8.8 km/h
      Reverse gears number 8 and 4 50 % more or 4

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Dump

      Blade pulling at maximum weight 13149 kg and 9859.3 kg 25 % more or 3289.7 kg

      Circle

      Maximum lifting above ground level 470 mm and 444.5 mm 5 % more or 25.5 mm

      11 reasons to buy Volvo G730 VHP:

      Operation

      Hydraulic system fluid volume 90 l. and 53 l. 41 % more or 37 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.
      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.
      Front axle standard operating weight 4806 kg and 3860 kg 20 % more or 946 kg

      Motor

      Displacement 8.3 l. and 8.1 l. 2 % more or 0.2 l.

      Hydraulic system

      Pump flow rate 191 l/min and 207 l/min 8 % less or 16 l/min

      Gear box

      Maximum forward speed 45.9 km/h and 41.6 km/h 9 % more or 4.3 km/h

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2100 mm 4 % less or 80.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2080 mm 4 % less or 73.4 mm
      Blade tilt front angle 44 degrees and 42 degrees 5 % more or 2 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Wheelbase 6120 mm and 6096 mm
      Blade base 2568 mm and 2591 mm
      Height to cab upper part 3180 mm and 3099 mm
      Dimensional length 8804 mm and 8484 mm
      Between tyres width 2510 mm and 2540 mm

      Operation

      Tyre size 14.00R24 Radial PR and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14819 kg and 15763 kg

      Motor

      Manufacturer John Deere and Cummins
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging
      Model 6081H and 6C8.3
      Effective speeds output 7-8 160.3 kW and 160.3 kW
      Maximum power 160.3 kW and 160.3 kW

      Hydraulic system

      Type of pump variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 18960.6 kPa and 17236.9 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 680 mm and 673.1 mm
      Lateral right shift 680 mm and 673.1 mm
      Mouldboard width 3660 mm and 3657.6 mm
      Mouldboard height 610 mm and 635 mm

      Circle

      Diameter 1520 mm and 1683 mm
      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 774.7 mm
      Right shift 724 mm and 749.3 mm

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6096 mm
      8. Blade base 2568 mm 8. Blade base 2591 mm