vs.

      John Deere 772A vs. Caterpillar 14H

      7 reasons to buy John Deere 772A:

      Steerage

      Turn radius 6.9 m and 7.9 m 13 % less or 1.0 m

      Operation

      Hydraulic system fluid volume 155.2 l. and 125 l. 19 % more or 30.2 l.

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 243 l/min 44 % less or 106.7 l/min

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees
      Maximum lifting above ground level 432 mm and 419 mm 3 % more or 13 mm

      18 reasons to buy Caterpillar 14H:

      Sizes

      Front part clearance 645 mm and 572 mm 11 % more or 73 mm

      Operation

      Front axle maximum operating weight 8811 kg and 4436.1 kg 50 % more or 4374.9 kg
      Rear axle maximum operating weight 17729 kg and 11209.2 kg 37 % more or 6519.8 kg
      Fuel Capacity 416 l. and 265 l. 36 % more or 151 l.
      Front axle standard operating weight 5305 kg and 4189.8 kg 21 % more or 1115.2 kg
      Rear axle standard operating weight 13504 kg and 9827.5 kg 27 % more or 3676.5 kg
      Cooling system fluid volume 48.3 l. and 26.5 l. 45 % more or 21.8 l.
      Circular gearbox fluid volume 6 l. and 3.8 l. 37 % more or 2.2 l.
      Each tandem case fluid volume 98 l. and 18.9 l. 81 % more or 79.1 l.

      Motor

      Effective speeds output 7-8 179 kW and 111.9 kW 37 % more or 67.1 kW
      Maximum power 179 kW and 111.9 kW 37 % more or 67.1 kW
      Displacement 10.3 l. and 7.6 l. 26 % more or 2.7 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 42.7 km/h and 40.4 km/h 5 % more or 2.3 km/h
      Maximum reverse gear 47.3 km/h and 13.8 km/h 71 % more or 33.5 km/h

      Front Axle

      Clearance 645 mm and 572 mm 11 % more or 73 mm

      Circle

      Maximum radius outside left tyres 2057 mm and 2280 mm 10 % less or 223 mm
      Right maximum radius outside tyres 2082 mm and 2250 mm 7 % less or 168 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Dual axis wheelbase 1540 mm and 1656 mm
      Height to cab upper part 3200 mm and 3339 mm
      Dimensional length 8470 mm and 9342 mm
      Between tyres width 2440 mm and 2817 mm
      Wheelbase 5970 mm and 6460 mm
      Blade base 2720 mm and 2860 mm

      Operation

      Total maximum operating weight 15645.3 kg and 26540 kg
      Overall standard operating weight 14017.4 kg and 18809 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and Caterpillar
      Model 6-466A and 3176 ATAAC

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and axial piston

      Gear box

      Transmission type powershift and direct drive, powershift, of planetary type
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 30 degrees and 32 degrees
      Wheel tilt 20 degrees and 18 degrees

      Dump

      Left lateral displacement 683 mm and 650 mm
      Lateral right shift 683 mm and 790 mm
      Mouldboard width 3657.6 mm and 4267 mm
      Mouldboard height 609.6 mm and 686 mm
      Mouldboard thickness 22.4 mm and 25 mm

      Circle

      Diameter 1500 mm and 1822 mm
      Left shift 851 mm and 650 mm
      Right shift 813 mm and 520 mm

      Images

      Sizes

      6. Front part clearance 572 mm 6. Front part clearance 645 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1656 mm
      8. Blade base 2720 mm 8. Blade base 2860 mm
      1. Dimensional length 8470 mm 1. Dimensional length 9342 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2817 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3339 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6460 mm