vs.

      John Deere 772A vs. John Deere JD670

      18 reasons to buy John Deere 772A:

      Sizes

      Front part clearance 572 mm and 559 mm 2 % more or 13 mm

      Operation

      Hydraulic system fluid volume 155.2 l. and 106 l. 32 % more or 49.2 l.
      Fuel Capacity 265 l. and 227 l. 14 % more or 38 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Each tandem case fluid volume 18.9 l. and 15.1 l. 20 % more or 3.8 l.
      Front axle standard operating weight 4189.8 kg and 3471 kg 17 % more or 718.8 kg
      Rear axle standard operating weight 9827.5 kg and 8245 kg 16 % more or 1582.5 kg
      Front axle maximum operating weight 4436.1 kg and 3615 kg 19 % more or 821.1 kg
      Rear axle maximum operating weight 11209.2 kg and 9741 kg 13 % more or 1468.2 kg

      Motor

      Effective speeds output 7-8 111.9 kW and 93.2 kW 17 % more or 18.7 kW
      Maximum power 111.9 kW and 93.2 kW 17 % more or 18.7 kW
      Effective drives torque 7-8 630.5 Nm and 504.4 Nm 20 % more or 126.1 Nm
      Displacement 7.6 l. and 6.8 l. 11 % more or 0.8 l.

      Gear box

      Maximum forward speed 40.4 km/h and 38.4 km/h 5 % more or 2.0 km/h
      Maximum reverse gear 13.8 km/h and 12.3 km/h 11 % more or 1.5 km/h

      Front Axle

      Clearance 572 mm and 559 mm 2 % more or 13 mm

      Circle

      Maximum lifting above ground level 432 mm and 409 mm 5 % more or 23 mm
      Blade tilt front angle 44 degrees and 35 degrees 20 % more or 9 degrees

      4 reasons to buy John Deere JD670:

      Steerage

      Turn radius 6.7 m and 6.9 m 3 % less or 0.2 m

      Hydraulic system

      Pump flow rate 132 l/min and 136.3 l/min 3 % less or 4.3 l/min

      Circle

      Maximum radius outside left tyres 2130 mm and 2280 mm 7 % less or 150 mm
      Right maximum radius outside tyres 2130 mm and 2250 mm 5 % less or 120 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Wheelbase 5970 mm and 5970 mm
      Blade base 2720 mm and 2540 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Height to cab upper part 3200 mm and 3200 mm
      Dimensional length 8470 mm and 8310 mm
      Between tyres width 2440 mm and 2340 mm

      Operation

      Total maximum operating weight 15645.3 kg and 13356 kg
      Oil system fluid volume 18.9 l. and 18.9 l.
      Tyre size 14.00-24 and 13.00-24
      Cooling system fluid volume 26.5 l. and 26.5 l.
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14017.4 kg and 11716 kg

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Cylinders number 6 and 6
      Manufacturer John Deere and John Deere
      Power measured at 2300 rev / min and 2300 rev / min
      Aspiration Turbocharging with intercooler and turbocharging

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Variable displacement with locking in the middle position

      Gear box

      Transmission type powershift and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard width 3657.6 mm and 3.7 mm
      Mouldboard height 609.6 mm and 610 mm
      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 683 mm
      Lateral right shift 683 mm and 683 mm

      Circle

      Diameter 1500 mm and 1470 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8470 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2340 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5970 mm
      6. Front part clearance 572 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2720 mm 8. Blade base 2540 mm