vs.

      John Deere 772A vs. New Holland F170

      10 reasons to buy John Deere 772A:

      Steerage

      Turn radius 6.9 m and 7.3 m 5 % less or 0.4 m

      Operation

      Front axle maximum operating weight 4436.1 kg and 4250 kg 4 % more or 186.1 kg
      Rear axle maximum operating weight 11209.2 kg and 10300 kg 8 % more or 909.2 kg
      Hydraulic system fluid volume 155.2 l. and 95 l. 39 % more or 60.2 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.

      Motor

      Effective drives torque 7-8 630.5 Nm and 230.5 Nm 63 % more or 400.0 Nm
      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 183 l/min 26 % less or 46.7 l/min

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      12 reasons to buy New Holland F170:

      Operation

      Generator current strength 70 amperes and 42 amperes 40 % more or 28 amperes
      Oil system fluid volume 19 l. and 18.9 l. 1 % more or 0.1 l.
      Fuel Capacity 340 l. and 265 l. 22 % more or 75 l.
      Cooling system fluid volume 40 l. and 26.5 l. 34 % more or 13.5 l.
      Each tandem case fluid volume 29 l. and 18.9 l. 35 % more or 10.1 l.

      Motor

      Displacement 8.3 l. and 7.6 l. 8 % more or 0.7 l.

      Gear box

      Maximum forward speed 43 km/h and 40.4 km/h 6 % more or 2.6 km/h
      Maximum reverse gear 28.5 km/h and 13.8 km/h 52 % more or 14.7 km/h

      Front Axle

      Clearance 622 mm and 572 mm 8 % more or 50 mm

      Circle

      Right maximum radius outside tyres 1895 mm and 2250 mm 16 % less or 355 mm
      Maximum lifting above ground level 444 mm and 432 mm 3 % more or 12 mm
      Maximum radius outside left tyres 1735 mm and 2280 mm 24 % less or 545 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dimensional length 8470 mm and 8521 mm
      Between tyres width 2440 mm and 2510 mm
      Wheelbase 5970 mm and 6219 mm
      Blade base 2720 mm and 2562 mm
      Dual axis wheelbase 1540 mm and 1594 mm
      Height to cab upper part 3200 mm and 3340 mm

      Operation

      Operating voltage 24 V and 24 V
      Total maximum operating weight 15645.3 kg and 14550 kg
      Tyre size 14.00-24 and 13.00 x 24 (12PR)

      Motor

      Aspiration Turbocharging with intercooler and turbocharging
      Manufacturer John Deere and Cummins
      Model 6-466A and 6 CTAA 8.3 2 level
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and full hydraulic system with load sensing

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type powershift and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 19 degrees

      Dump

      Mouldboard thickness 22.4 mm and 22 mm
      Mouldboard width 3657.6 mm and 3962 mm
      Left lateral displacement 683 mm and 533 mm
      Mouldboard height 609.6 mm and 671 mm
      Lateral right shift 683 mm and 686 mm

      Circle

      Diameter 1500 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2720 mm 8. Blade base 2562 mm
      1. Dimensional length 8470 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1594 mm