vs.

      John Deere 772A vs. Terex TG150

      10 reasons to buy John Deere 772A:

      Sizes

      Front part clearance 572 mm and 546 mm 5 % more or 26 mm

      Operation

      Hydraulic system fluid volume 155.2 l. and 150 l. 3 % more or 5.2 l.

      Motor

      Displacement 7.6 l. and 6 l. 21 % more or 1.6 l.
      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 40.4 km/h and 40 km/h 1 % more or 0.4 km/h

      Front Axle

      Clearance 572 mm and 546 mm 5 % more or 26 mm

      Circle

      Maximum radius outside left tyres 2280 mm and 2500 mm 9 % less or 220 mm
      Right maximum radius outside tyres 2250 mm and 3180 mm 29 % less or 930 mm

      11 reasons to buy Terex TG150:

      Operation

      Generator current strength 55 amperes and 42 amperes 24 % more or 13 amperes
      Front axle standard operating weight 4300 kg and 4189.8 kg 3 % more or 110.2 kg
      Rear axle standard operating weight 10200 kg and 9827.5 kg 4 % more or 372.5 kg
      Fuel Capacity 310 l. and 265 l. 15 % more or 45 l.
      Cooling system fluid volume 45 l. and 26.5 l. 41 % more or 18.5 l.
      Circular gearbox fluid volume 6 l. and 3.8 l. 37 % more or 2.2 l.
      Each tandem case fluid volume 40 l. and 18.9 l. 53 % more or 21.1 l.

      Motor

      Maximum power 121.5 kW and 111.9 kW 8 % more or 9.6 kW

      Hydraulic system

      Pump flow rate 99 l/min and 136.3 l/min 27 % less or 37.3 l/min

      Gear box

      Maximum reverse gear 25 km/h and 13.8 km/h 45 % more or 11.2 km/h

      Circle

      Maximum lifting above ground level 480 mm and 432 mm 10 % more or 48 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 45 degrees
      Turn radius 6.9 m and 6.9 m

      Sizes

      Wheelbase 5970 mm and 5676 mm
      Blade base 2720 mm and 2204 mm
      Dual axis wheelbase 1540 mm and 1555 mm
      Height to cab upper part 3200 mm and 3276 mm
      Dimensional length 8470 mm and 9402 mm
      Between tyres width 2440 mm and 2419 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14017.4 kg and 14500 kg
      Tyre size 14.00-24 and 13.00 -24 TG SGG-2A Goodyear

      Motor

      Aspiration Turbocharging with intercooler and turbocharging
      Manufacturer John Deere and Cummins
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and axial piston pump

      Gear box

      Transmission type powershift and powershift transmission with torque converter

      Front Axle

      Wheel tilt 20 degrees and 17 degrees
      General fluctuations 30 degrees and 15 degrees

      Dump

      Mouldboard thickness 22.4 mm and 20 mm
      Left lateral displacement 683 mm and 1250 mm
      Lateral right shift 683 mm and 1250 mm
      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 609.6 mm and 580 mm

      Circle

      Diameter 1500 mm and 1348 mm

      Images

      Sizes

      8. Blade base 2720 mm 8. Blade base 2204 mm
      1. Dimensional length 8470 mm 1. Dimensional length 9402 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2419 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3276 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5676 mm
      6. Front part clearance 572 mm 6. Front part clearance 546 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1555 mm