vs.

      John Deere 772A vs. Volvo G710

      9 reasons to buy John Deere 772A:

      Steerage

      Turn radius 6.9 m and 7.7 m 10 % less or 0.8 m

      Operation

      Rear axle standard operating weight 9827.5 kg and 9630 kg 2 % more or 197.5 kg

      Motor

      Effective drives torque 7-8 630.5 Nm and 596.6 Nm 5 % more or 33.9 Nm
      Displacement 7.6 l. and 5.9 l. 22 % more or 1.7 l.
      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Effective speeds output 7-8 111.9 kW and 104.4 kW 7 % more or 7.5 kW
      Maximum power 111.9 kW and 104.4 kW 7 % more or 7.5 kW

      Hydraulic system

      Pump flow rate 136.3 l/min and 191 l/min 29 % less or 54.7 l/min

      Gear box

      Maximum forward speed 40.4 km/h and 39.8 km/h 1 % more or 0.6 km/h

      4 reasons to buy Volvo G710:

      Operation

      Front axle standard operating weight 4264 kg and 4189.8 kg 2 % more or 74.2 kg

      Motor

      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Gear box

      Maximum reverse gear 28.5 km/h and 13.8 km/h 52 % more or 14.7 km/h

      Front Axle

      Clearance 597 mm and 572 mm 4 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Blade base 2720 mm and 2616 mm
      Between tyres width 2440 mm and 2489 mm
      Wheelbase 5970 mm and 6096 mm
      Dimensional length 8470 mm and 8458 mm

      Operation

      Overall standard operating weight 14017.4 kg and 13894 kg

      Motor

      Aspiration Turbocharging with intercooler and turbocharging
      Manufacturer John Deere and Cummins
      Model 6-466A and 6B5.9
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and hydraulic system with load sensing

      Gear box

      Transmission type powershift and Volvo 8400
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard thickness 22.4 mm and 22.2 mm
      Left lateral displacement 683 mm and 774.7 mm
      Lateral right shift 683 mm and 774.7 mm
      Mouldboard width 3657.6 mm and 3658 mm
      Mouldboard height 609.6 mm and 635 mm

      Circle

      Diameter 1500 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8470 mm 1. Dimensional length 8458 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2489 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6096 mm
      8. Blade base 2720 mm 8. Blade base 2616 mm