vs.

      John Deere 772A vs. Volvo G780 VHP

      7 reasons to buy John Deere 772A:

      Operation

      Hydraulic system fluid volume 155.2 l. and 90 l. 42 % more or 65.2 l.

      Motor

      Power measured at 2300 rev / min and 2100 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 183 l/min 26 % less or 46.7 l/min

      Gear box

      Maximum forward speed 40.4 km/h and 38.3 km/h 5 % more or 2.1 km/h

      Circle

      Maximum lifting above ground level 432 mm and 431.8 mm 0 % more or 0.2 mm
      Maximum radius outside left tyres 2280 mm and 2311.4 mm 1 % less or 31.4 mm
      Right maximum radius outside tyres 2250 mm and 2298.7 mm 2 % less or 48.7 mm

      14 reasons to buy Volvo G780 VHP:

      Operation

      Each tandem case fluid volume 105 l. and 18.9 l. 82 % more or 86.1 l.
      Front axle standard operating weight 6028 kg and 4189.8 kg 30 % more or 1838.2 kg
      Rear axle standard operating weight 13360 kg and 9827.5 kg 26 % more or 3532.5 kg
      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes
      Fuel Capacity 378.5 l. and 265 l. 30 % more or 113.5 l.
      Cooling system fluid volume 50 l. and 26.5 l. 47 % more or 23.5 l.

      Motor

      Effective drives torque 7-8 1145.7 Nm and 630.5 Nm 45 % more or 515.2 Nm
      Displacement 10.8 l. and 7.6 l. 30 % more or 3.2 l.
      Effective speeds output 7-8 175.2 kW and 111.9 kW 36 % more or 63.3 kW
      Maximum power 175.2 kW and 111.9 kW 36 % more or 63.3 kW

      Gear box

      Maximum reverse gear 27.4 km/h and 13.8 km/h 50 % more or 13.6 km/h

      Front Axle

      Clearance 698 mm and 572 mm 18 % more or 126 mm

      Circle

      Blade tilt front angle 46 degrees and 44 degrees 4 % more or 2 degrees
      Blade tilt rear angle 13 degrees and 10 degrees 23 % more or 3 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3200 mm and 3200 mm
      Dimensional length 8470 mm and 8687 mm
      Between tyres width 2440 mm and 2794 mm
      Wheelbase 5970 mm and 6248 mm
      Blade base 2720 mm and 2718 mm

      Operation

      Tyre size 14.00-24 and 16.00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14017.4 kg and 19388 kg

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Aspiration Turbocharging with intercooler and turbocharging
      Manufacturer John Deere and Cummins
      Model 6-466A and M11

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and hydraulic system with load sensing

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 609.6 mm and 787.4 mm
      Mouldboard thickness 22.4 mm and 25.4 mm
      Left lateral displacement 683 mm and 673.1 mm
      Lateral right shift 683 mm and 673.1 mm

      Circle

      Left shift 851 mm and 762 mm
      Right shift 813 mm and 749.3 mm
      Diameter 1500 mm and 1692 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2720 mm 8. Blade base 2718 mm
      1. Dimensional length 8470 mm 1. Dimensional length 8687 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2794 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6248 mm