vs.

      John Deere 772AH vs. Volvo G710B

      8 reasons to buy John Deere 772AH:

      Operation

      Hydraulic system fluid volume 155.2 l. and 134 l. 14 % more or 21.2 l.

      Motor

      Effective speeds output 7-8 134.2 kW and 129 kW 4 % more or 5.2 kW
      Maximum power 134.2 kW and 129 kW 4 % more or 5.2 kW
      Displacement 7.6 l. and 7.1 l. 7 % more or 0.5 l.

      Hydraulic system

      Pump flow rate 136.3 l/min and 284 l/min 52 % less or 147.7 l/min

      Gear box

      Maximum forward speed 40.4 km/h and 40.1 km/h 1 % more or 0.3 km/h

      Circle

      Maximum lifting above ground level 432 mm and 431.8 mm 0 % more or 0.2 mm
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      12 reasons to buy Volvo G710B:

      Operation

      Cooling system fluid volume 47 l. and 26.5 l. 44 % more or 20.5 l.
      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.
      Front axle standard operating weight 4394 kg and 4189.8 kg 5 % more or 204.2 kg
      Rear axle standard operating weight 10757 kg and 9827.5 kg 9 % more or 929.5 kg
      Fuel Capacity 378.5 l. and 265 l. 30 % more or 113.5 l.

      Motor

      Effective drives torque 7-8 801.3 Nm and 728.1 Nm 9 % more or 73.2 Nm

      Gear box

      Maximum reverse gear 28.6 km/h and 13.8 km/h 52 % more or 14.8 km/h

      Front Axle

      Clearance 597 mm and 572 mm 4 % more or 25 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2280 mm 11 % less or 260.7 mm
      Blade tilt front angle 47 degrees and 44 degrees 6 % more or 3 degrees
      Right maximum radius outside tyres 2044.7 mm and 2250 mm 9 % less or 205.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3200 mm and 3073 mm
      Dimensional length 8470 mm and 9093 mm
      Between tyres width 2440 mm and 2489 mm
      Wheelbase 5970 mm and 6096 mm
      Blade base 2720 mm and 2616 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 14.00-24 and 13.00 x 24, G-2
      Overall standard operating weight 14017.4 kg and 15150 kg

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration Turbocharging with intercooler and turbocharging
      Manufacturer John Deere and Volvo
      Model 6-466A and D7DGAE2
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and hydraulic system with load sensing

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 635 mm
      Mouldboard thickness 22.4 mm and 22.2 mm
      Left lateral displacement 683 mm and 673.1 mm
      Lateral right shift 683 mm and 673.1 mm

      Circle

      Right shift 813 mm and 749.3 mm
      Diameter 1500 mm and 1683 mm
      Rotating 360 degrees and 360 degrees
      Left shift 851 mm and 774.7 mm

      Images

      Sizes

      4. Wheelbase 5970 mm 4. Wheelbase 6096 mm
      8. Blade base 2720 mm 8. Blade base 2616 mm
      1. Dimensional length 8470 mm 1. Dimensional length 9093 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2489 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3073 mm