- Home/
- Comparison/
- Grader/
- John Deere 772CH vs. Caterpillar 120H NA
John Deere 772CH vs. Caterpillar 120H NA
10 reasons to buy John Deere 772CH:
Steerage
Turn radius | 6.7 m and 7.2 m | 7 % less or 0.5 m |
Operation
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Fuel Capacity | 401.3 l. and 284 l. | 29 % more or 117.3 l. |
Motor
Effective speeds output 7-8 | 156.6 kW and 104.4 kW | 33 % more or 52.2 kW |
Maximum power | 156.6 kW and 104.4 kW | 33 % more or 52.2 kW |
Effective speeds output 1-2 | 134.2 kW and 93.2 kW | 31 % more or 41.0 kW |
Displacement | 8.1 l. and 6.6 l. | 19 % more or 1.5 l. |
Gear box
Reverse gears number | 8 and 6 | 25 % more or 2 |
Maximum reverse gear | 41.5 km/h and 33.7 km/h | 19 % more or 7.8 km/h |
Circle
Maximum lifting above ground level | 470 mm and 457 mm | 3 % more or 13 mm |
3 reasons to buy Caterpillar 120H NA:
Operation
Hydraulic system fluid volume | 68 l. and 59 l. | 13 % more or 9 l. |
Hydraulic system
Pump flow rate | 148 l/min and 207.1 l/min | 29 % less or 59.1 l/min |
Gear box
Maximum forward speed | 42.6 km/h and 41.5 km/h | 3 % more or 1.1 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 20 degrees |
Sizes
Between tyres width | 2510 mm and 2440 mm |
Wheelbase | 5970 mm and 5870 mm |
Blade base | 2670 mm and 2600 mm |
Height to cab upper part | 3120 mm and 3110 mm |
Dimensional length | 8610 mm and 82620 mm |
Operation
Overall standard operating weight | 15023 kg and 12519 kg |
Tyre size | 14.00-24 and 13-24 10PR (G-2) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | John Deere and Caterpillar |
Model | 6081H and 3116 DIT |
Hydraulic system
Type of pump | variable displacement with locking in the middle position and Axial-piston pump |
Overflow valve pressure | 17581.6 kPa and 24131.6 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Mouldboard height | 609.6 mm and 610 mm |
Mouldboard thickness | 22.4 mm and 22 mm |
Mouldboard width | 3657.6 mm and 3660 mm |
Images
Sizes
1. Dimensional length | 8610 mm | 1. Dimensional length | 82620 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3120 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 5870 mm |
8. Blade base | 2670 mm | 8. Blade base | 2600 mm |