vs.

      John Deere 772D vs. Terex TG190

      14 reasons to buy John Deere 772D:

      Steerage

      Turn radius 7.2 m and 7.5 m 4 % less or 0.3 m

      Operation

      Generator current strength 100 amperes and 55 amperes 45 % more or 45 amperes
      Each tandem case fluid volume 75.7 l. and 42 l. 45 % more or 33.7 l.
      Cooling system fluid volume 49.2 l. and 42 l. 15 % more or 7.2 l.

      Motor

      Displacement 8.1 l. and 6 l. 26 % more or 2.1 l.
      Effective speeds output 5-6 171.5 kW and 138 kW 20 % more or 33.5 kW
      Maximum power 171.5 kW and 138 kW 20 % more or 33.5 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum forward speed 41.6 km/h and 40 km/h 4 % more or 1.6 km/h
      Maximum reverse gear 41.6 km/h and 19.4 km/h 53 % more or 22.2 km/h

      Dump

      Blade pulling at maximum weight 19595 kg and 9835.2 kg 50 % more or 9759.8 kg

      Circle

      Right maximum radius outside tyres 2080 mm and 3180 mm 35 % less or 1100 mm
      Maximum radius outside left tyres 2100 mm and 2220 mm 5 % less or 120 mm

      9 reasons to buy Terex TG190:

      Sizes

      Front part clearance 591 mm and 587 mm 1 % more or 4 mm

      Operation

      Circular gearbox fluid volume 6 l. and 5.7 l. 5 % more or 0.3 l.
      Front axle standard operating weight 5000 kg and 4364 kg 13 % more or 636 kg
      Rear axle standard operating weight 13700 kg and 11186 kg 18 % more or 2514 kg
      Fuel Capacity 480 l. and 401.2 l. 16 % more or 78.8 l.
      Hydraulic system fluid volume 170 l. and 53 l. 69 % more or 117 l.
      Transmission fluid volume 34 l. and 22.7 l. 33 % more or 11.3 l.

      Hydraulic system

      Pump flow rate 99 l/min and 207 l/min 52 % less or 108 l/min

      Front Axle

      Clearance 591 mm and 587 mm 1 % more or 4 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 45 degrees

      Sizes

      Height to cab upper part 3180 mm and 3300 mm
      Dimensional length 8804 mm and 10266 mm
      Between tyres width 2510 mm and 2490 mm
      Wheelbase 6120 mm and 6136 mm
      Blade base 2568 mm and 2638 mm
      Dual axis wheelbase 1540 mm and 1542 mm

      Operation

      Tyre size 14.00R24 Radial PR and 14.00 -24TG
      Operating voltage 24 V and 24 V
      Overall standard operating weight 15549 kg and 18700 kg

      Motor

      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging
      Manufacturer John Deere and Cummins
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and axial piston pump
      Overflow valve pressure 18960.6 kPa and 18400 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission with torque converter

      Front Axle

      Wheel tilt 20 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard thickness 22 mm and 20 mm
      Left lateral displacement 680 mm and 1250 mm
      Lateral right shift 680 mm and 1250 mm
      Mouldboard width 3660 mm and 3660 mm
      Mouldboard height 610 mm and 630 mm

      Circle

      Maximum lifting above ground level 470 mm and 470 mm
      Diameter 1520 mm and 1510 mm

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6136 mm
      6. Front part clearance 587 mm 6. Front part clearance 591 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1542 mm
      8. Blade base 2568 mm 8. Blade base 2638 mm