- Home/
- Comparison/
- Grader/
- John Deere 872D vs. Caterpillar 140M
John Deere 872D vs. Caterpillar 140M
14 reasons to buy John Deere 872D:
Steerage
Turn radius | 7.2 m and 7.8 m | 8 % less or 0.6 m |
Sizes
Front part clearance | 587 mm and 571 mm | 3 % more or 16 mm |
Operation
Cooling system fluid volume | 49.2 l. and 47 l. | 4 % more or 2.2 l. |
Each tandem case fluid volume | 75.7 l. and 64 l. | 15 % more or 11.7 l. |
Front axle standard operating weight | 4613 kg and 4161 kg | 10 % more or 452 kg |
Rear axle standard operating weight | 11812 kg and 10969 kg | 7 % more or 843 kg |
Motor
Effective speeds output 7-8 | 175.2 kW and 136.5 kW | 22 % more or 38.7 kW |
Maximum power | 182.7 kW and 136.5 kW | 25 % more or 46.2 kW |
Displacement | 8.1 l. and 7.2 l. | 11 % more or 0.9 l. |
Hydraulic system
Pump flow rate | 207 l/min and 210 l/min | 1 % less or 3 l/min |
Gear box
Reverse gears number | 8 and 6 | 25 % more or 2 |
Maximum reverse gear | 41.1 km/h and 36.8 km/h | 10 % more or 4.3 km/h |
Front Axle
Clearance | 587 mm and 571 mm | 3 % more or 16 mm |
Circle
Blade tilt front angle | 42 degrees and 40 degrees | 5 % more or 2 degrees |
11 reasons to buy Caterpillar 140M:
Operation
Front axle maximum operating weight | 8123 kg and 7268 kg | 11 % more or 855 kg |
Rear axle maximum operating weight | 14954 kg and 14777 kg | 1 % more or 177 kg |
Fuel Capacity | 416 l. and 401.2 l. | 4 % more or 14.8 l. |
Hydraulic system fluid volume | 60 l. and 53 l. | 12 % more or 7 l. |
Rear differential/final drive fluid volume | 65 l. and 36 l. | 45 % more or 29 l. |
Circular gearbox fluid volume | 7 l. and 5.7 l. | 19 % more or 1.3 l. |
Gear box
Maximum forward speed | 46.6 km/h and 41.1 km/h | 12 % more or 5.5 km/h |
Dump
Blade pulling at maximum weight | 20769 kg and 19849 kg | 4 % more or 920 kg |
Circle
Maximum radius outside left tyres | 1790 mm and 2320 mm | 23 % less or 530 mm |
Right maximum radius outside tyres | 1978 mm and 2310 mm | 14 % less or 332 mm |
Maximum lifting above ground level | 480 mm and 437 mm | 9 % more or 43 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Sizes
Height to cab upper part | 3180 mm and 3293 mm |
Dimensional length | 8804 mm and 8713 mm |
Between tyres width | 2640 mm and 2493 mm |
Wheelbase | 6120 mm and 6121 mm |
Blade base | 2533 mm and 2552 mm |
Dual axis wheelbase | 1540 mm and 1523 mm |
Operation
Total maximum operating weight | 22045 kg and 23077 kg |
Overall standard operating weight | 16421 kg and 15130 kg |
Motor
Power measured at | 2000 rev / min and 2000 rev / min |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Caterpillar |
Model | 6081H and C7 ACERT VHP |
Hydraulic system
Type of pump | variable displacement piston pump and variable displacement piston pump |
Overflow valve pressure | 18960.6 kPa and 24150 kPa |
Gear box
Transmission type | Powershift transmission with direct drive and direct drive, powershift, camshaft |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Mouldboard width | 4300 mm and 3700 mm |
Mouldboard height | 686 mm and 610 mm |
Mouldboard thickness | 25 mm and 22 mm |
Left lateral displacement | 680 mm and 510 mm |
Lateral right shift | 680 mm and 660 mm |
Circle
Blade tilt rear angle | 5 degrees and 5 degrees |
Diameter | 1520 mm and 1530 mm |
Left shift | 787 mm and 695 mm |
Right shift | 724 mm and 728 mm |
Images
Sizes
1. Dimensional length | 8804 mm | 1. Dimensional length | 8713 mm |
2. Between tyres width | 2640 mm | 2. Between tyres width | 2493 mm |
3. Height to cab upper part | 3180 mm | 3. Height to cab upper part | 3293 mm |
4. Wheelbase | 6120 mm | 4. Wheelbase | 6121 mm |
6. Front part clearance | 587 mm | 6. Front part clearance | 571 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1523 mm |
8. Blade base | 2533 mm | 8. Blade base | 2552 mm |