vs.

      John Deere 872D vs. John Deere 670B

      18 reasons to buy John Deere 872D:

      Sizes

      Front part clearance 587 mm and 559 mm 5 % more or 28 mm

      Operation

      Rear axle standard operating weight 11812 kg and 9256 kg 22 % more or 2556 kg
      Front axle maximum operating weight 7268 kg and 4476 kg 38 % more or 2792 kg
      Rear axle maximum operating weight 14777 kg and 10630 kg 28 % more or 4147 kg
      Front axle standard operating weight 4613 kg and 3909 kg 15 % more or 704 kg
      Fuel Capacity 401.2 l. and 265 l. 34 % more or 136.2 l.
      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.
      Each tandem case fluid volume 75.7 l. and 18.9 l. 75 % more or 56.8 l.
      Cooling system fluid volume 49.2 l. and 26.5 l. 46 % more or 22.7 l.
      Generator current strength 100 amperes and 42 amperes 58 % more or 58 amperes

      Motor

      Effective drives torque 7-8 1277 Nm and 623.7 Nm 51 % more or 653.3 Nm
      Displacement 8.1 l. and 6.8 l. 16 % more or 1.3 l.
      Effective speeds output 7-8 175.2 kW and 100.7 kW 43 % more or 74.5 kW
      Maximum power 182.7 kW and 100.7 kW 45 % more or 82.0 kW

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 41.1 km/h and 39.3 km/h 4 % more or 1.8 km/h
      Maximum reverse gear 41.1 km/h and 13.2 km/h 68 % more or 27.9 km/h

      Front Axle

      Clearance 587 mm and 559 mm 5 % more or 28 mm

      8 reasons to buy John Deere 670B:

      Steerage

      Turn radius 6.7 m and 7.2 m 7 % less or 0.5 m

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1300 rev / min and 1000 rev / min 23 % more or 300 rev

      Hydraulic system

      Pump flow rate 142 l/min and 207 l/min 31 % less or 65 l/min

      Circle

      Maximum radius outside left tyres 2160 mm and 2320 mm 7 % less or 160 mm
      Right maximum radius outside tyres 2110 mm and 2310 mm 9 % less or 200 mm
      Maximum lifting above ground level 444 mm and 437 mm 2 % more or 7 mm
      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Between tyres width 2640 mm and 2390 mm
      Wheelbase 6120 mm and 5970 mm
      Blade base 2533 mm and 2670 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Height to cab upper part 3180 mm and 3060 mm
      Dimensional length 8804 mm and 8310 mm

      Operation

      Overall standard operating weight 16421 kg and 13166 kg
      Total maximum operating weight 22045 kg and 15107 kg
      Tyre size 17.5R25 Radial PR and 13.00-25
      Hydraulic system fluid volume 53 l. and 53 l.
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging
      Manufacturer John Deere and John Deere
      Model 6081H and 6068T
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement hydraulic pump

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 4300 mm and 3.7 mm
      Mouldboard height 686 mm and 610 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 680 mm and 683 mm
      Lateral right shift 680 mm and 683 mm

      Circle

      Right shift 724 mm and 724 mm
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1520 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 787 mm

      Images

      Sizes

      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3060 mm
      4. Wheelbase 6120 mm 4. Wheelbase 5970 mm
      6. Front part clearance 587 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2533 mm 8. Blade base 2670 mm
      1. Dimensional length 8804 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2640 mm 2. Between tyres width 2390 mm