vs.

      John Deere 872D vs. John Deere 772D

      13 reasons to buy John Deere 872D:

      Operation

      Rear axle standard operating weight 11812 kg and 11186 kg 5 % more or 626 kg
      Front axle maximum operating weight 7268 kg and 7185 kg 1 % more or 83 kg
      Rear axle maximum operating weight 14777 kg and 14587 kg 1 % more or 190 kg
      Front axle standard operating weight 4613 kg and 4364 kg 5 % more or 249 kg

      Motor

      Effective speeds output 3-4 172 kW and 160 kW 7 % more or 12 kW
      Maximum power 182.7 kW and 171.5 kW 6 % more or 11.2 kW
      Effective speeds output 5-6 182.7 kW and 171.5 kW 6 % more or 11.2 kW
      Effective drives torque 1-2 1075 Nm and 1000.6 Nm 7 % more or 74.4 Nm
      Effective drives torque 3-4 1132 Nm and 1054.8 Nm 7 % more or 77.2 Nm
      Effective speeds output 7-8 175.2 kW and 160.3 kW 9 % more or 14.9 kW
      Effective drives torque 7-8 1277 Nm and 1259.6 Nm 1 % more or 17.4 Nm
      Effective speeds output 1-2 153 kW and 138 kW 10 % more or 15 kW

      Dump

      Blade pulling at maximum weight 19849 kg and 19595 kg 1 % more or 254 kg

      6 reasons to buy John Deere 772D:

      Motor

      Effective drives torque 5-6 1259.6 Nm and 1182 Nm 6 % more or 77.6 Nm

      Gear box

      Maximum forward speed 41.6 km/h and 41.1 km/h 1 % more or 0.5 km/h
      Maximum reverse gear 41.6 km/h and 41.1 km/h 1 % more or 0.5 km/h

      Circle

      Maximum radius outside left tyres 2100 mm and 2320 mm 9 % less or 220 mm
      Right maximum radius outside tyres 2080 mm and 2310 mm 10 % less or 230 mm
      Maximum lifting above ground level 470 mm and 437 mm 7 % more or 33 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees
      Turn radius 7.2 m and 7.2 m

      Sizes

      Height to cab upper part 3180 mm and 3180 mm
      Dimensional length 8804 mm and 8804 mm
      Between tyres width 2640 mm and 2510 mm
      Wheelbase 6120 mm and 6120 mm
      Blade base 2533 mm and 2568 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Front part clearance 587 mm and 587 mm

      Operation

      Operating voltage 24 V and 24 V
      Hydraulic system fluid volume 53 l. and 53 l.
      Generator current strength 100 amperes and 100 amperes
      Transmission fluid volume 22.7 l. and 22.7 l.
      Rear differential/final drive fluid volume 36 l. and 36 l.
      Circular gearbox fluid volume 5.7 l. and 5.7 l.
      Overall standard operating weight 16421 kg and 15549 kg
      Each tandem case fluid volume 75.7 l. and 75.7 l.
      Tyre size 17.5R25 Radial PR and 14.00R24 Radial PR
      Total maximum operating weight 22045 kg and 21772 kg
      Fuel Capacity 401.2 l. and 401.2 l.
      Cooling system fluid volume 49.2 l. and 49.2 l.

      Motor

      Cylinders number 6 and 6
      Power measured at 2000 rev / min and 2000 rev / min
      Torque measured at 1000 rev / min and 1000 rev / min
      Displacement 8.1 l. and 8.1 l.
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer John Deere and John Deere
      Model 6081H and 6081H

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Pump flow rate 207 l/min and 207 l/min
      Overflow valve pressure 18960.6 kPa and 18960.6 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 32 degrees
      Clearance 587 mm and 587 mm
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Mouldboard height 686 mm and 610 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 680 mm and 680 mm
      Lateral right shift 680 mm and 680 mm
      Mouldboard width 4300 mm and 3660 mm

      Circle

      Right shift 724 mm and 724 mm
      Blade tilt rear angle 5 degrees and 5 degrees
      Blade tilt front angle 42 degrees and 42 degrees
      Diameter 1520 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 787 mm

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2640 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6120 mm
      6. Front part clearance 587 mm 6. Front part clearance 587 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2533 mm 8. Blade base 2568 mm