- Home/
- Comparison/
- Grader/
- John Deere JD570 vs. Caterpillar 120H ES
John Deere JD570 vs. Caterpillar 120H ES
3 reasons to buy John Deere JD570:
Steerage
Turn radius | 5.5 m and 7.2 m | 24 % less or 1.7 m |
Operation
Hydraulic system fluid volume | 79.5 l. and 68 l. | 14 % more or 11.5 l. |
Hydraulic system
Pump flow rate | 101.8 l/min and 148 l/min | 31 % less or 46.2 l/min |
8 reasons to buy Caterpillar 120H ES:
Operation
Fuel Capacity | 284 l. and 189.3 l. | 33 % more or 94.7 l. |
Motor
Effective speeds output 7-8 | 104.4 kW and 61.9 kW | 41 % more or 42.5 kW |
Maximum power | 104.4 kW and 61.9 kW | 41 % more or 42.5 kW |
Displacement | 6.6 l. and 5 l. | 24 % more or 1.6 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 42.6 km/h and 34.4 km/h | 19 % more or 8.2 km/h |
Maximum reverse gear | 33.7 km/h and 10.9 km/h | 68 % more or 22.8 km/h |
Circle
Maximum lifting above ground level | 457 mm and 311.2 mm | 32 % more or 145.8 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Sizes
Height to cab upper part | 3200.4 mm and 3110 mm |
Dimensional length | 7415.8 mm and 8260 mm |
Between tyres width | 2386.6 mm and 2440 mm |
Wheelbase | 5282.2 mm and 5870 mm |
Blade base | 2337.8 mm and 2600 mm |
Operation
Overall standard operating weight | 9197.9 kg and 12518 kg |
Tyre size | 13.00-24 and 12-24 10PR (G-2) |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | John Deere and Caterpillar |
Hydraulic system
Type of pump | piston pump and Axial-piston pump |
Overflow valve pressure | 13789.5 kPa and 24131.6 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Mouldboard width | 3657.6 mm and 3660 mm |
Mouldboard height | 609.6 mm and 610 mm |
Mouldboard thickness | 15.7 mm and 22 mm |
Images
Sizes
1. Dimensional length | 7415.8 mm | 1. Dimensional length | 8260 mm |
2. Between tyres width | 2386.6 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3200.4 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 5282.2 mm | 4. Wheelbase | 5870 mm |
8. Blade base | 2337.8 mm | 8. Blade base | 2600 mm |