vs.

      John Deere JD570 vs. John Deere 770AH

      6 reasons to buy John Deere JD570:

      Steerage

      Turn radius 5.5 m and 6.7 m 18 % less or 1.2 m

      Sizes

      Front part clearance 597.4 mm and 572 mm 4 % more or 25.4 mm

      Operation

      Circular gearbox fluid volume 5.7 l. and 3.8 l. 33 % more or 1.9 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 101.8 l/min and 136.3 l/min 25 % less or 34.5 l/min

      Front Axle

      Clearance 597.4 mm and 572 mm 4 % more or 25.4 mm

      16 reasons to buy John Deere 770AH:

      Operation

      Front axle maximum operating weight 4123.6 kg and 2630.8 kg 36 % more or 1492.8 kg
      Rear axle maximum operating weight 11230 kg and 6168.9 kg 45 % more or 5061.1 kg
      Front axle standard operating weight 3877.3 kg and 2494.8 kg 36 % more or 1382.5 kg
      Fuel Capacity 265 l. and 189.3 l. 29 % more or 75.7 l.
      Rear axle standard operating weight 9848.4 kg and 5715.3 kg 42 % more or 4133.1 kg
      Oil system fluid volume 18.9 l. and 9.5 l. 50 % more or 9.4 l.
      Cooling system fluid volume 26.5 l. and 20.8 l. 22 % more or 5.7 l.
      Hydraulic system fluid volume 117.3 l. and 79.5 l. 32 % more or 37.8 l.

      Motor

      Effective drives torque 7-8 728.1 Nm and 287.4 Nm 61 % more or 440.7 Nm
      Displacement 7.6 l. and 5 l. 34 % more or 2.6 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Effective speeds output 7-8 134.2 kW and 61.9 kW 54 % more or 72.3 kW
      Maximum power 134.2 kW and 61.9 kW 54 % more or 72.3 kW

      Gear box

      Maximum forward speed 40.4 km/h and 34.4 km/h 15 % more or 6.0 km/h
      Maximum reverse gear 13.8 km/h and 10.9 km/h 21 % more or 2.9 km/h

      Circle

      Maximum lifting above ground level 432 mm and 311.2 mm 28 % more or 120.8 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Between tyres width 2386.6 mm and 2440 mm
      Blade base 2337.8 mm and 2720 mm
      Wheelbase 5282.2 mm and 5970 mm
      Dual axis wheelbase 1447.8 mm and 1540 mm
      Height to cab upper part 3200.4 mm and 3200 mm
      Dimensional length 7415.8 mm and 8470 mm

      Operation

      Operating voltage 12 V and 24 V
      Total maximum operating weight 8210 kg and 15353.6 kg
      Overall standard operating weight 9197.9 kg and 13725.7 kg
      Each tandem case fluid volume 18.9 l. and 18.9 l.
      Tyre size 13.00-24 and 14

      Motor

      Aspiration natural aspiration and Turbocharging with intercooler
      Manufacturer John Deere and John Deere

      Hydraulic system

      Type of pump piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard thickness 15.7 mm and 22.4 mm
      Left lateral displacement 679.5 mm and 683 mm
      Lateral right shift 793.8 mm and 683 mm
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 609.6 mm

      Circle

      Diameter 1371.6 mm and 1500 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7415.8 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2386.6 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3200.4 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5282.2 mm 4. Wheelbase 5970 mm
      6. Front part clearance 597.4 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1447.8 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2337.8 mm 8. Blade base 2720 mm