vs.

      John Deere JD570 vs. Volvo G730 VHP

      1 reasons to buy John Deere JD570:

      Hydraulic system

      Pump flow rate 101.8 l/min and 191 l/min 47 % less or 89.2 l/min

      14 reasons to buy Volvo G730 VHP:

      Operation

      Fuel Capacity 378.5 l. and 189.3 l. 50 % more or 189.2 l.
      Hydraulic system fluid volume 90 l. and 79.5 l. 12 % more or 10.5 l.
      Cooling system fluid volume 47 l. and 20.8 l. 56 % more or 26.2 l.
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.
      Front axle standard operating weight 4806 kg and 2494.8 kg 48 % more or 2311.2 kg
      Rear axle standard operating weight 10957 kg and 5715.3 kg 48 % more or 5241.7 kg

      Motor

      Effective speeds output 7-8 160.3 kW and 61.9 kW 61 % more or 98.4 kW
      Maximum power 160.3 kW and 61.9 kW 61 % more or 98.4 kW
      Effective drives torque 7-8 964 Nm and 287.4 Nm 70 % more or 676.6 Nm
      Displacement 8.3 l. and 5 l. 40 % more or 3.3 l.

      Gear box

      Maximum forward speed 45.9 km/h and 34.4 km/h 25 % more or 11.5 km/h
      Maximum reverse gear 32.8 km/h and 10.9 km/h 67 % more or 21.9 km/h

      Front Axle

      Clearance 610 mm and 597.4 mm 2 % more or 12.6 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 311.2 mm 30 % more or 133.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Wheelbase 5282.2 mm and 6096 mm
      Blade base 2337.8 mm and 2591 mm
      Height to cab upper part 3200.4 mm and 3099 mm
      Dimensional length 7415.8 mm and 8484 mm
      Between tyres width 2386.6 mm and 2540 mm

      Operation

      Tyre size 13.00-24 and 14.00 x 24, G-2
      Operating voltage 12 V and 24 V
      Overall standard operating weight 9197.9 kg and 15763 kg

      Motor

      Manufacturer John Deere and Cummins
      Aspiration natural aspiration and turbocharging

      Hydraulic system

      Type of pump piston pump and hydraulic system with load sensing
      Overflow valve pressure 13789.5 kPa and 17236.9 kPa

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 30 degrees and 16 degrees
      Wheel tilt 20 degrees and 18 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 635 mm
      Mouldboard thickness 15.7 mm and 22.2 mm
      Left lateral displacement 679.5 mm and 673.1 mm
      Lateral right shift 793.8 mm and 673.1 mm

      Circle

      Diameter 1371.6 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7415.8 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2386.6 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3200.4 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 5282.2 mm 4. Wheelbase 6096 mm
      8. Blade base 2337.8 mm 8. Blade base 2591 mm