vs.

      John Deere JD570A vs. John Deere 770AH

      5 reasons to buy John Deere JD570A:

      Steerage

      Turn radius 5.5 m and 6.7 m 18 % less or 1.2 m

      Sizes

      Front part clearance 582 mm and 572 mm 2 % more or 10 mm

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 102 l/min and 136.3 l/min 25 % less or 34.3 l/min

      Front Axle

      Clearance 597 mm and 572 mm 4 % more or 25 mm

      17 reasons to buy John Deere 770AH:

      Operation

      Front axle standard operating weight 3877.3 kg and 2608 kg 33 % more or 1269.3 kg
      Rear axle maximum operating weight 11230 kg and 6418 kg 43 % more or 4812 kg
      Rear axle standard operating weight 9848.4 kg and 6495 kg 34 % more or 3353.4 kg
      Fuel Capacity 265 l. and 189.3 l. 29 % more or 75.7 l.
      Front axle maximum operating weight 4123.6 kg and 3063 kg 26 % more or 1060.6 kg
      Oil system fluid volume 18.9 l. and 11.4 l. 40 % more or 7.5 l.
      Cooling system fluid volume 26.5 l. and 21.2 l. 20 % more or 5.3 l.
      Hydraulic system fluid volume 117.3 l. and 79.5 l. 32 % more or 37.8 l.
      Circular gearbox fluid volume 3.8 l. and 1.4 l. 63 % more or 2.4 l.

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Effective speeds output 7-8 134.2 kW and 63.4 kW 53 % more or 70.8 kW
      Maximum power 134.2 kW and 68.6 kW 49 % more or 65.6 kW
      Effective drives torque 7-8 728.1 Nm and 322.7 Nm 56 % more or 405.4 Nm
      Displacement 7.6 l. and 5.4 l. 29 % more or 2.2 l.

      Gear box

      Maximum forward speed 40.4 km/h and 34.8 km/h 14 % more or 5.6 km/h
      Maximum reverse gear 13.8 km/h and 11.4 km/h 17 % more or 2.4 km/h

      Circle

      Maximum lifting above ground level 432 mm and 330 mm 24 % more or 102 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Blade base 2340 mm and 2720 mm
      Dual axis wheelbase 1440 mm and 1540 mm
      Height to cab upper part 3200 mm and 3200 mm
      Dimensional length 7430 mm and 8470 mm
      Between tyres width 2410 mm and 2440 mm
      Wheelbase 5280 mm and 5970 mm

      Operation

      Total maximum operating weight 9481 kg and 15353.6 kg
      Overall standard operating weight 9083 kg and 13725.7 kg
      Each tandem case fluid volume 18.9 l. and 18.9 l.
      Tyre size 13.00-24 and 14
      Operating voltage 12 V and 24 V

      Motor

      Manufacturer John Deere and John Deere
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with intercooler

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type powershift and powershift

      Front Axle

      General fluctuations 30 degrees and 30 degrees
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Mouldboard thickness 15.8 mm and 22.4 mm
      Left lateral displacement 794 mm and 683 mm
      Lateral right shift 679 mm and 683 mm
      Mouldboard width 3.7 mm and 3657.6 mm
      Mouldboard height 559 mm and 609.6 mm

      Circle

      Diameter 1370 mm and 1500 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7430 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5280 mm 4. Wheelbase 5970 mm
      6. Front part clearance 582 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1440 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2340 mm 8. Blade base 2720 mm