vs.

      John Deere JD570A vs. Mitsubishi MG330-E

      5 reasons to buy John Deere JD570A:

      Operation

      Hydraulic system fluid volume 79.5 l. and 67 l. 16 % more or 12.5 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 102 l/min and 120 l/min 15 % less or 18 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 597 mm and 555 mm 7 % more or 42 mm

      10 reasons to buy Mitsubishi MG330-E:

      Operation

      Circular gearbox fluid volume 3.5 l. and 1.4 l. 60 % more or 2.1 l.
      Each tandem case fluid volume 73 l. and 18.9 l. 74 % more or 54.1 l.
      Fuel Capacity 230 l. and 189.3 l. 18 % more or 40.7 l.
      Oil system fluid volume 13 l. and 11.4 l. 12 % more or 1.6 l.

      Motor

      Maximum power 100.7 kW and 68.6 kW 32 % more or 32.1 kW
      Displacement 7.5 l. and 5.4 l. 28 % more or 2.1 l.

      Gear box

      Maximum forward speed 42.6 km/h and 34.8 km/h 18 % more or 7.8 km/h
      Maximum reverse gear 43.3 km/h and 11.4 km/h 74 % more or 31.9 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Circle

      Maximum lifting above ground level 480 mm and 330 mm 31 % more or 150 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 26 degrees

      Sizes

      Height to cab upper part 3200 mm and 3130 mm
      Dimensional length 7430 mm and 7820 mm
      Between tyres width 2410 mm and 2450 mm
      Wheelbase 5280 mm and 5700 mm
      Blade base 2340 mm and 2500 mm

      Operation

      Overall standard operating weight 9083 kg and 15600 kg
      Tyre size 13.00-24 and 14.00-24-12
      Operating voltage 12 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and Mitsubishi

      Hydraulic system

      Overflow valve pressure 13789.5 kPa and 17.2 kPa

      Gear box

      Transmission type powershift and planetary gear

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard width 3.7 mm and 3710 mm
      Mouldboard height 559 mm and 610 mm
      Mouldboard thickness 15.8 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 5280 mm 4. Wheelbase 5700 mm
      8. Blade base 2340 mm 8. Blade base 2500 mm
      1. Dimensional length 7430 mm 1. Dimensional length 7820 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2450 mm