vs.

      John Deere JD670 vs. Dressta RD200C

      5 reasons to buy John Deere JD670:

      Steerage

      Turn radius 6.7 m and 7500 m 100 % less or 7493.3 m

      Motor

      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 559 mm and 550 mm 2 % more or 9 mm

      11 reasons to buy Dressta RD200C:

      Operation

      Hydraulic system fluid volume 130 l. and 106 l. 18 % more or 24 l.
      Each tandem case fluid volume 30 l. and 15.1 l. 50 % more or 14.9 l.
      Fuel Capacity 380 l. and 227 l. 40 % more or 153 l.
      Cooling system fluid volume 40 l. and 26.5 l. 34 % more or 13.5 l.

      Motor

      Power measured at 2400 rev / min and 2300 rev / min 4 % more or 100 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Maximum power 132.7 kW and 93.2 kW 30 % more or 39.5 kW

      Hydraulic system

      Pump flow rate 80 l/min and 132 l/min 39 % less or 52 l/min

      Gear box

      Maximum reverse gear 31.4 km/h and 12.3 km/h 61 % more or 19.1 km/h
      Maximum forward speed 44.7 km/h and 38.4 km/h 14 % more or 6.3 km/h

      Circle

      Maximum lifting above ground level 500 mm and 409 mm 18 % more or 91 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dimensional length 8310 mm and 9540 mm
      Wheelbase 5970 mm and 7300 mm
      Between tyres width 2340 mm and 2500 mm
      Blade base 2540 mm and 3050 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Height to cab upper part 3200 mm and 3300 mm

      Operation

      Overall standard operating weight 11716 kg and 36376 kg
      Tyre size 13.00-24 and 14.00 - 24 G-2 16PR
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer John Deere and Cummins
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging and CAC

      Hydraulic system

      Type of pump Variable displacement with locking in the middle position and axial piston pump
      Overflow valve pressure 15513.2 kPa and 14000 kPa

      Gear box

      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 22 degrees
      General fluctuations 30 degrees and 40 degrees

      Dump

      Mouldboard width 3.7 mm and 3660 mm
      Mouldboard height 610 mm and 670 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 683 mm and 800 mm
      Lateral right shift 683 mm and 800 mm

      Circle

      Diameter 1470 mm and 1350 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2540 mm 8. Blade base 3050 mm
      1. Dimensional length 8310 mm 1. Dimensional length 9540 mm
      2. Between tyres width 2340 mm 2. Between tyres width 2500 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 5970 mm 4. Wheelbase 7300 mm