vs.

      John Deere JD670 vs. John Deere 772B

      5 reasons to buy John Deere JD670:

      Steerage

      Turn radius 6.7 m and 6.9 m 3 % less or 0.2 m

      Operation

      Hydraulic system fluid volume 106 l. and 87.1 l. 18 % more or 18.9 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 132 l/min and 198.4 l/min 33 % less or 66.4 l/min

      Circle

      Maximum radius outside left tyres 2130 mm and 2160 mm 1 % less or 30 mm

      20 reasons to buy John Deere 772B:

      Sizes

      Front part clearance 572 mm and 559 mm 2 % more or 13 mm

      Operation

      Rear axle maximum operating weight 11829.7 kg and 9741 kg 18 % more or 2088.7 kg
      Front axle standard operating weight 4263.8 kg and 3471 kg 19 % more or 792.8 kg
      Rear axle standard operating weight 10455.3 kg and 8245 kg 21 % more or 2210.3 kg
      Fuel Capacity 340.7 l. and 227 l. 33 % more or 113.7 l.
      Front axle maximum operating weight 4830.8 kg and 3615 kg 25 % more or 1215.8 kg
      Oil system fluid volume 24.6 l. and 18.9 l. 23 % more or 5.7 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Each tandem case fluid volume 18.9 l. and 15.1 l. 20 % more or 3.8 l.

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Effective speeds output 7-8 115.6 kW and 93.2 kW 19 % more or 22.4 kW
      Maximum power 115.6 kW and 93.2 kW 19 % more or 22.4 kW
      Effective drives torque 7-8 650.8 Nm and 504.4 Nm 22 % more or 146.4 Nm
      Displacement 7.6 l. and 6.8 l. 11 % more or 0.8 l.

      Gear box

      Maximum forward speed 40.6 km/h and 38.4 km/h 5 % more or 2.2 km/h
      Maximum reverse gear 13.8 km/h and 12.3 km/h 11 % more or 1.5 km/h

      Front Axle

      Clearance 572 mm and 559 mm 2 % more or 13 mm

      Circle

      Right maximum radius outside tyres 2110 mm and 2130 mm 1 % less or 20 mm
      Maximum lifting above ground level 470 mm and 409 mm 13 % more or 61 mm
      Blade tilt front angle 49 degrees and 35 degrees 29 % more or 14 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Blade base 2540 mm and 2670 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Height to cab upper part 3200 mm and 3090 mm
      Dimensional length 8310 mm and 8510 mm
      Between tyres width 2340 mm and 2440 mm
      Wheelbase 5970 mm and 5970 mm

      Operation

      Total maximum operating weight 13356 kg and 16660.4 kg
      Overall standard operating weight 11716 kg and 14719.1 kg
      Cooling system fluid volume 26.5 l. and 26.5 l.
      Tyre size 13.00-24 and 14.00-24
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer John Deere and John Deere
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump Variable displacement with locking in the middle position and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type powershift and powershift

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Lateral right shift 683 mm and 683 mm
      Mouldboard width 3.7 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 683 mm and 683 mm

      Circle

      Diameter 1470 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 8510 mm
      2. Between tyres width 2340 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3090 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5970 mm
      6. Front part clearance 559 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2540 mm 8. Blade base 2670 mm