- Home/
- Comparison/
- Grader/
- John Deere JD670 vs. LiuGong CLG418
John Deere JD670 vs. LiuGong CLG418
6 reasons to buy John Deere JD670:
Steerage
Turn radius | 6.7 m and 8.2 m | 18 % less or 1.5 m |
Motor
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 4 and 3 | 25 % more or 1 |
Circle
Right maximum radius outside tyres | 2130 mm and 2705 mm | 21 % less or 575 mm |
Maximum radius outside left tyres | 2130 mm and 2655 mm | 20 % less or 525 mm |
5 reasons to buy LiuGong CLG418:
Motor
Displacement | 8.3 l. and 6.8 l. | 18 % more or 1.5 l. |
Gear box
Maximum forward speed | 40.3 km/h and 38.4 km/h | 5 % more or 1.9 km/h |
Maximum reverse gear | 26.1 km/h and 12.3 km/h | 53 % more or 13.8 km/h |
Circle
Maximum lifting above ground level | 675 mm and 409 mm | 39 % more or 266 mm |
Blade tilt front angle | 40 degrees and 35 degrees | 12 % more or 5 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 20 degrees |
Sizes
Height to cab upper part | 3200 mm and 3438 mm |
Dimensional length | 8310 mm and 8731 mm |
Between tyres width | 2340 mm and 2600 mm |
Operation
Overall standard operating weight | 11716 kg and 15500 kg |
Motor
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Cummins |
Gear box
Transmission type | powershift and powershift transmission |
Front Axle
Wheel tilt | 20 degrees and 17 degrees |
General fluctuations | 30 degrees and 30 degrees |
Dump
Mouldboard width | 3.7 mm and 3960 mm |
Mouldboard height | 610 mm and 650 mm |
Mouldboard thickness | 22 mm and 22 mm |
Images
Sizes
1. Dimensional length | 8310 mm | 1. Dimensional length | 8731 mm |
2. Between tyres width | 2340 mm | 2. Between tyres width | 2600 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3438 mm |