vs.

      Komatsu GD555-3 vs. Mauldin MG618

      12 reasons to buy Komatsu GD555-3:

      Operation

      Fuel Capacity 340 l. and 151.4 l. 55 % more or 188.6 l.
      Hydraulic system fluid volume 85 l. and 75.7 l. 11 % more or 9.3 l.
      Front axle standard operating weight 4000 kg and 2540.1 kg 36 % more or 1459.9 kg
      Rear axle standard operating weight 10040 kg and 5892.2 kg 41 % more or 4147.8 kg

      Motor

      Maximum power 119.3 kW and 99.2 kW 17 % more or 20.1 kW
      Effective drives torque 1-2 576 Nm and 492.6 Nm 14 % more or 83.4 Nm
      Displacement 5.9 l. and 4 l. 32 % more or 1.9 l.

      Gear box

      Maximum forward speed 42.9 km/h and 27.4 km/h 36 % more or 15.5 km/h
      Maximum reverse gear 39.1 km/h and 27.4 km/h 30 % more or 11.7 km/h
      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 4 and 2 50 % more or 2

      Circle

      Maximum lifting above ground level 485 mm and 349.3 mm 28 % more or 135.7 mm

      5 reasons to buy Mauldin MG618:

      Steerage

      Turn radius 5.5 m and 6.8 m 19 % less or 1.3 m

      Circle

      Maximum radius outside left tyres 914.4 mm and 2000 mm 54 % less or 1085.6 mm
      Right maximum radius outside tyres 914.4 mm and 2000 mm 54 % less or 1085.6 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 45 degrees and 5 degrees 89 % more or 40 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 23 degrees and 32 degrees

      Sizes

      Dimensional length 9390 mm and 7010.4 mm
      Between tyres width 2525 mm and 2258.6 mm
      Wheelbase 5850 mm and 5029.2 mm
      Blade base 2500 mm and 2069.6 mm
      Dual axis wheelbase 1535 mm and 1130.8 mm
      Height to cab upper part 3100 mm and 2767.6 mm

      Operation

      Overall standard operating weight 14040 kg and 8432.3 kg
      Tyre size Low-pressure, without inner tube, 14.00 X 24, 12 layers - G2 and 15-19.5
      Operating voltage 24 V and 12 V

      Motor

      Manufacturer Komatsu and Deutz
      Model SAA6D102E-2 and 2012
      Aspiration turbocharging and cooling at the outlet and turbocharging and cooling at the outlet

      Gear box

      Transmission type powershift transmission and hydrostatic

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3710 mm and 3048 mm
      Mouldboard height 660 mm and 482.6 mm

      Images

      Sizes

      7. Dual axis wheelbase 1535 mm 7. Dual axis wheelbase 1130.8 mm
      8. Blade base 2500 mm 8. Blade base 2069.6 mm
      1. Dimensional length 9390 mm 1. Dimensional length 7010.4 mm
      2. Between tyres width 2525 mm 2. Between tyres width 2258.6 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 2767.6 mm
      4. Wheelbase 5850 mm 4. Wheelbase 5029.2 mm