vs.

      Komatsu GD555-3 vs. Mitsubishi MG130-E

      15 reasons to buy Komatsu GD555-3:

      Operation

      Transmission fluid volume 45 l. and 23 l. 49 % more or 22 l.
      Generator current strength 90 amperes and 30 amperes 67 % more or 60 amperes
      Circular gearbox fluid volume 5 l. and 3.5 l. 30 % more or 1.5 l.
      Each tandem case fluid volume 83 l. and 26 l. 69 % more or 57 l.
      Fuel Capacity 340 l. and 115 l. 66 % more or 225 l.
      Oil system fluid volume 14.4 l. and 12 l. 17 % more or 2.4 l.
      Hydraulic system fluid volume 85 l. and 67 l. 21 % more or 18 l.

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Maximum power 119.3 kW and 70.8 kW 41 % more or 48.5 kW
      Displacement 5.9 l. and 4.2 l. 29 % more or 1.7 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 42.9 km/h and 32.6 km/h 24 % more or 10.3 km/h
      Maximum reverse gear 39.1 km/h and 33.2 km/h 15 % more or 5.9 km/h

      Front Axle

      Clearance 610 mm and 480 mm 21 % more or 130 mm

      Circle

      Maximum lifting above ground level 485 mm and 400 mm 18 % more or 85 mm

      3 reasons to buy Mitsubishi MG130-E:

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 106 l/min and 204.4 l/min 48 % less or 98.4 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2

      Neutral reasons:

      Steerage

      Left and right hinge connection 23 degrees and 26 degrees

      Sizes

      Height to cab upper part 3100 mm and 3010 mm
      Dimensional length 9390 mm and 6910 mm
      Between tyres width 2525 mm and 2140 mm
      Wheelbase 5850 mm and 4900 mm
      Blade base 2500 mm and 2135 mm

      Operation

      Tyre size Low-pressure, without inner tube, 14.00 X 24, 12 layers - G2 and 10.00-20-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14040 kg and 10060 kg

      Motor

      Manufacturer Komatsu and Mitsubishi
      Model SAA6D102E-2 and SK4-T

      Hydraulic system

      Type of pump Hydraulic system of Closed Center Load Sensing System (CLSS) and Pump with double gear
      Overflow valve pressure 20684.3 kPa and 17.2 kPa

      Gear box

      Transmission type powershift transmission and planetary gear

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3710 mm and 3100 mm
      Mouldboard height 660 mm and 610 mm
      Mouldboard thickness 22 mm and 19 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Rotating 360 degrees and 360 degrees
      Left shift 625 mm and 1470 mm
      Right shift 625 mm and 1230 mm

      Images

      Sizes

      1. Dimensional length 9390 mm 1. Dimensional length 6910 mm
      2. Between tyres width 2525 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3010 mm
      4. Wheelbase 5850 mm 4. Wheelbase 4900 mm
      8. Blade base 2500 mm 8. Blade base 2135 mm