vs.

      Komatsu GD555-3 vs. New Holland F156.6A

      15 reasons to buy Komatsu GD555-3:

      Steerage

      Turn radius 6.8 m and 8250 m 100 % less or 8243.2 m

      Operation

      Generator current strength 90 amperes and 70 amperes 22 % more or 20 amperes
      Transmission fluid volume 45 l. and 21 l. 53 % more or 24 l.
      Each tandem case fluid volume 83 l. and 68 l. 18 % more or 15 l.
      Front axle standard operating weight 4000 kg and 456 kg 89 % more or 3544 kg
      Oil system fluid volume 14.4 l. and 12.5 l. 13 % more or 1.9 l.
      Fuel Capacity 340 l. and 275 l. 19 % more or 65 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.9 km/h and 37.4 km/h 13 % more or 5.5 km/h
      Maximum reverse gear 39.1 km/h and 27.1 km/h 31 % more or 12.0 km/h

      Dump

      Maximum cutting depth 835 mm and 500 mm 40 % more or 335 mm

      Circle

      Maximum radius outside left tyres 2000 mm and 2520 mm 21 % less or 520 mm
      Right maximum radius outside tyres 2000 mm and 3210 mm 38 % less or 1210 mm
      Maximum lifting above ground level 485 mm and 480 mm 1 % more or 5 mm

      7 reasons to buy New Holland F156.6A:

      Operation

      Hydraulic system fluid volume 200 l. and 85 l. 57 % more or 115 l.
      Rear axle standard operating weight 10141 kg and 10040 kg 1 % more or 101 kg

      Motor

      Effective speeds output 5-6 130.5 kW and 119.3 kW 9 % more or 11.2 kW
      Maximum power 130.5 kW and 119.3 kW 9 % more or 11.2 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 126 l/min and 204.4 l/min 38 % less or 78.4 l/min

      Front Axle

      Clearance 646 mm and 610 mm 6 % more or 36 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 23 degrees and 28 degrees

      Sizes

      Height to cab upper part 3100 mm and 3373 mm
      Dimensional length 9390 mm and 9975 mm
      Between tyres width 2525 mm and 2595 mm
      Wheelbase 5850 mm and 5983 mm
      Blade base 2500 mm and 2504 mm
      Dual axis wheelbase 1535 mm and 1544 mm

      Operation

      Tyre size Low-pressure, without inner tube, 14.00 X 24, 12 layers - G2 and 17.5R25EM
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14040 kg and 14736 kg

      Motor

      Cylinders number 6 and 6
      Displacement 5.9 l. and 5.9 l.
      Aspiration turbocharging and cooling at the outlet and turbocharging water cooling
      Model SAA6D102E-2 and CNH 4-stroke cycle, naturally aspirated diesel engine

      Hydraulic system

      Type of pump Hydraulic system of Closed Center Load Sensing System (CLSS) and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 20684.3 kPa and 20000 kPa

      Gear box

      Transmission type powershift transmission and powershift transmission

      Front Axle

      General fluctuations 32 degrees and 15 degrees
      Wheel tilt 20 degrees and 21 degrees

      Dump

      Mouldboard width 3710 mm and 3660 mm
      Mouldboard height 660 mm and 152 mm
      Mouldboard thickness 22 mm and 19 mm
      Left lateral displacement 820 mm and 645 mm
      Lateral right shift 820 mm and 755 mm

      Circle

      Right shift 625 mm and 755 mm
      Rotating 360 degrees and degrees
      Left shift 625 mm and 645 mm

      Images

      Sizes

      7. Dual axis wheelbase 1535 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 2500 mm 8. Blade base 2504 mm
      1. Dimensional length 9390 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2525 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 5850 mm 4. Wheelbase 5983 mm