- Home/
- Comparison/
- Grader/
- Komatsu GD655-5 vs. Caterpillar NO.14E
Komatsu GD655-5 vs. Caterpillar NO.14E
14 reasons to buy Komatsu GD655-5:
Steerage
Turn radius | 7.4 m and 11.6 m | 36 % less or 4.2 m |
Operation
Fuel Capacity | 416 l. and 285 l. | 31 % more or 131 l. |
Hydraulic system fluid volume | 69 l. and 32 l. | 54 % more or 37 l. |
Each tandem case fluid volume | 57 l. and 47 l. | 18 % more or 10 l. |
Rear axle standard operating weight | 11582 kg and 9700 kg | 16 % more or 1882 kg |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Effective speeds output 5-6 | 149.1 kW and 111.9 kW | 25 % more or 37.2 kW |
Maximum power | 162.6 kW and 111.9 kW | 31 % more or 50.7 kW |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 44.3 km/h and 39.1 km/h | 12 % more or 5.2 km/h |
Front Axle
Clearance | 620 mm and 580 mm | 6 % more or 40 mm |
Circle
Maximum radius outside left tyres | 1940 mm and 2440 mm | 20 % less or 500 mm |
Right maximum radius outside tyres | 1940 mm and 2440 mm | 20 % less or 500 mm |
Maximum lifting above ground level | 480 mm and 460 mm | 4 % more or 20 mm |
9 reasons to buy Caterpillar NO.14E:
Operation
Cooling system fluid volume | 47 l. and 25 l. | 47 % more or 22 l. |
Transmission fluid volume | 76 l. and 45 l. | 41 % more or 31 l. |
Rear differential/final drive fluid volume | 35 l. and 17 l. | 51 % more or 18 l. |
Front axle standard operating weight | 4600 kg and 4453 kg | 3 % more or 147 kg |
Motor
Displacement | 10.5 l. and 6.7 l. | 36 % more or 3.8 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 47.3 km/h and 40.2 km/h | 15 % more or 7.1 km/h |
Circle
Blade tilt front angle | 90 degrees and 40 degrees | 56 % more or 50 degrees |
Blade tilt rear angle | 90 degrees and 5 degrees | 94 % more or 85 degrees |
Neutral reasons:
Sizes
Blade base | 2580 mm and 2750 mm |
Dual axis wheelbase | 1524 mm and 1520 mm |
Height to cab upper part | 3200 mm and 3250 mm |
Dimensional length | 9205 mm and 8300 mm |
Between tyres width | 2485 mm and 2440 mm |
Wheelbase | 6480 mm and 6100 mm |
Operation
Overall standard operating weight | 16035 kg and 14300 kg |
Tyre size | 17.5R25 and 14-24 10PR |
Motor
Manufacturer | Komatsu and Caterpillar |
Cylinders number | 6 and 6 |
Gear box
Transmission type | powershift and powershift transmission |
Front Axle
General fluctuations | 32 degrees and 31 degrees |
Wheel tilt | 16 degrees and 22 degrees |
Circle
Left shift | 590 mm and 1040 mm |
Right shift | 590 mm and 940 mm |
Diameter | 1530 mm and 1650 mm |
Rotating | 360 degrees and 180 degrees |
Images
Sizes
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3250 mm |
4. Wheelbase | 6480 mm | 4. Wheelbase | 6100 mm |
7. Dual axis wheelbase | 1524 mm | 7. Dual axis wheelbase | 1520 mm |
8. Blade base | 2580 mm | 8. Blade base | 2750 mm |
1. Dimensional length | 9205 mm | 1. Dimensional length | 8300 mm |
2. Between tyres width | 2485 mm | 2. Between tyres width | 2440 mm |