vs.

      Komatsu GD655-5 vs. Volvo G960

      9 reasons to buy Komatsu GD655-5:

      Steerage

      Turn radius 7.4 m and 7265 m 100 % less or 7257.6 m

      Operation

      Fuel Capacity 416 l. and 404 l. 3 % more or 12 l.
      Oil system fluid volume 23 l. and 21.5 l. 7 % more or 1.5 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev

      Hydraulic system

      Pump flow rate 200 l/min and 208 l/min 4 % less or 8 l/min

      Gear box

      Maximum reverse gear 40.2 km/h and 32 km/h 20 % more or 8.2 km/h

      Front Axle

      Clearance 620 mm and 610 mm 2 % more or 10 mm

      Circle

      Maximum radius outside left tyres 1940 mm and 2020 mm 4 % less or 80 mm
      Right maximum radius outside tyres 1940 mm and 2010 mm 3 % less or 70 mm

      15 reasons to buy Volvo G960:

      Operation

      Each tandem case fluid volume 100 l. and 57 l. 43 % more or 43 l.
      Front axle standard operating weight 5100 kg and 4453 kg 13 % more or 647 kg
      Rear axle standard operating weight 12450 kg and 11582 kg 7 % more or 868 kg
      Front axle maximum operating weight 7570 kg and 5243 kg 31 % more or 2327 kg
      Rear axle maximum operating weight 14290 kg and 12673 kg 11 % more or 1617 kg
      Cooling system fluid volume 34 l. and 25 l. 26 % more or 9 l.
      Hydraulic system fluid volume 91 l. and 69 l. 24 % more or 22 l.
      Transmission fluid volume 61 l. and 45 l. 26 % more or 16 l.

      Motor

      Maximum power 180.5 kW and 162.6 kW 10 % more or 17.9 kW
      Displacement 7.2 l. and 6.7 l. 7 % more or 0.5 l.
      Effective speeds output 7-8 180.5 kW and 162.6 kW 10 % more or 17.9 kW

      Gear box

      Maximum forward speed 45.4 km/h and 44.3 km/h 2 % more or 1.1 km/h

      Dump

      Maximum cutting depth 790 mm and 615 mm 22 % more or 175 mm

      Circle

      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 23 degrees

      Sizes

      Height to cab upper part 3200 mm and 3225 mm
      Dimensional length 9205 mm and 9150 mm
      Between tyres width 2485 mm and 2537 mm
      Wheelbase 6480 mm and 6280 mm
      Blade base 2580 mm and 2650 mm

      Operation

      Tyre size 17.5R25 and 14:00 x 24, G-2
      Overall standard operating weight 16035 kg and 17550 kg
      Total maximum operating weight 17916 kg and 21860 kg

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Komatsu and Volvo
      Model SAA6D107E-1 and D7E
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 16 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Mouldboard width 4320 mm and 3657.6 mm
      Mouldboard height 660 mm and 635 mm
      Left lateral displacement 820 mm and 673 mm
      Lateral right shift 820 mm and 673 mm

      Circle

      Diameter 1530 mm and 1626 mm
      Rotating 360 degrees and 360 degrees
      Left shift 590 mm and 775 mm
      Right shift 590 mm and 749 mm

      Images

      Sizes

      1. Dimensional length 9205 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2485 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6480 mm 4. Wheelbase 6280 mm
      8. Blade base 2580 mm 8. Blade base 2650 mm