vs.

      Komatsu GD825A-2 vs. New Holland F156.6A

      16 reasons to buy Komatsu GD825A-2:

      Steerage

      Turn radius 7.9 m and 8250 m 100 % less or 8242.1 m

      Operation

      Front axle maximum operating weight 7910 kg and 5200 kg 34 % more or 2710 kg
      Rear axle maximum operating weight 18450 kg and 11500 kg 38 % more or 6950 kg
      Fuel Capacity 500 l. and 275 l. 45 % more or 225 l.
      Oil system fluid volume 38 l. and 12.5 l. 67 % more or 25.5 l.
      Transmission fluid volume 25 l. and 21 l. 16 % more or 4 l.
      Each tandem case fluid volume 190 l. and 68 l. 64 % more or 122 l.

      Motor

      Maximum power 208.8 kW and 130.5 kW 37 % more or 78.3 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum forward speed 44.9 km/h and 37.4 km/h 17 % more or 7.5 km/h
      Maximum reverse gear 47.9 km/h and 27.1 km/h 43 % more or 20.8 km/h

      Front Axle

      Clearance 680 mm and 646 mm 5 % more or 34 mm

      Circle

      Maximum radius outside left tyres 2400 mm and 2520 mm 5 % less or 120 mm
      Right maximum radius outside tyres 2400 mm and 3210 mm 25 % less or 810 mm
      Maximum lifting above ground level 490 mm and 480 mm 2 % more or 10 mm

      3 reasons to buy New Holland F156.6A:

      Operation

      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes
      Hydraulic system fluid volume 200 l. and 80 l. 60 % more or 120 l.

      Dump

      Maximum cutting depth 500 mm and 480 mm 4 % more or 20 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Dimensional length 10010 mm and 9975 mm
      Between tyres width 3310 mm and 2595 mm
      Wheelbase 7132.3 mm and 5983 mm
      Blade base 3100 mm and 2504 mm
      Dual axis wheelbase 1840 mm and 1544 mm
      Height to cab upper part 3550 mm and 3373 mm

      Operation

      Tyre size 23.5 X 25-12PR (L3) tires and 17.5R25EM
      Operating voltage 24 V and 24 V
      Total maximum operating weight 26420 kg and 16200 kg

      Motor

      Cylinders number 6 and 6
      Displacement 5.9 l. and 5.9 l.
      Model S6D140E and CNH 4-stroke cycle, naturally aspirated diesel engine
      Power measured at 2100 rev / min and 2100 rev / min

      Hydraulic system

      Type of pump Double-acting hydraulic cylinders of piston-type and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 24545.3 kPa and 20000 kPa

      Gear box

      Transmission type komatsu Hydro-Static Transmission and powershift transmission

      Front Axle

      Wheel tilt 14.5 degrees and 21 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard width 4928 mm and 3660 mm
      Mouldboard height 800 mm and 152 mm
      Mouldboard thickness 25 mm and 19 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      1. Dimensional length 10010 mm 1. Dimensional length 9975 mm
      2. Between tyres width 3310 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3550 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 7132.3 mm 4. Wheelbase 5983 mm
      7. Dual axis wheelbase 1840 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 3100 mm 8. Blade base 2504 mm