- Home/
- Comparison/
- Grader/
- Mauldin MG618 vs. Caterpillar 140G
Mauldin MG618 vs. Caterpillar 140G
4 reasons to buy Mauldin MG618:
Steerage
Turn radius | 5.5 m and 7.3 m | 25 % less or 1.8 m |
Operation
Hydraulic system fluid volume | 75.7 l. and 68 l. | 10 % more or 7.7 l. |
Circle
Right maximum radius outside tyres | 914.4 mm and 1830 mm | 50 % less or 915.6 mm |
Maximum radius outside left tyres | 914.4 mm and 1960 mm | 53 % less or 1045.6 mm |
8 reasons to buy Caterpillar 140G:
Operation
Fuel Capacity | 284 l. and 151.4 l. | 47 % more or 132.6 l. |
Motor
Displacement | 10.5 l. and 4 l. | 62 % more or 6.5 l. |
Maximum power | 111.9 kW and 99.2 kW | 11 % more or 12.7 kW |
Gear box
Forward gears number | 6 and 2 | 67 % more or 4 |
Reverse gears number | 6 and 2 | 67 % more or 4 |
Maximum forward speed | 41 km/h and 27.4 km/h | 33 % more or 13.6 km/h |
Maximum reverse gear | 41 km/h and 27.4 km/h | 33 % more or 13.6 km/h |
Circle
Maximum lifting above ground level | 464 mm and 349.3 mm | 25 % more or 114.7 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 32 degrees and 50 degrees |
Sizes
Height to cab upper part | 2767.6 mm and 3360 mm |
Dimensional length | 7010.4 mm and 8310 mm |
Between tyres width | 2258.6 mm and 2440 mm |
Wheelbase | 5029.2 mm and 5920 mm |
Blade base | 2069.6 mm and 2570 mm |
Dual axis wheelbase | 1130.8 mm and 1520 mm |
Operation
Overall standard operating weight | 8432.3 kg and 12620 kg |
Tyre size | 15-19.5 and 14x24 10PR |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | Deutz and Caterpillar |
Model | 2012 and 3306 |
Gear box
Transmission type | hydrostatic and powershift transmission with direct drive |
Front Axle
General fluctuations | 30 degrees and 32 degrees |
Wheel tilt | 20 degrees and 18 degrees |
Dump
Mouldboard width | 3048 mm and 3660 mm |
Mouldboard height | 482.6 mm and 610 mm |
Images
Sizes
1. Dimensional length | 7010.4 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2258.6 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 2767.6 mm | 3. Height to cab upper part | 3360 mm |
4. Wheelbase | 5029.2 mm | 4. Wheelbase | 5920 mm |
7. Dual axis wheelbase | 1130.8 mm | 7. Dual axis wheelbase | 1520 mm |
8. Blade base | 2069.6 mm | 8. Blade base | 2570 mm |