- Home/
- Comparison/
- Grader/
- Mauldin MG618 vs. Caterpillar 140H
Mauldin MG618 vs. Caterpillar 140H
5 reasons to buy Mauldin MG618:
Steerage
Turn radius | 5.5 m and 7.5 m | 27 % less or 2.0 m |
Circle
Maximum radius outside left tyres | 914.4 mm and 1896 mm | 52 % less or 981.6 mm |
Right maximum radius outside tyres | 914.4 mm and 1978 mm | 54 % less or 1063.6 mm |
Blade tilt front angle | 45 degrees and 40 degrees | 11 % more or 5 degrees |
Blade tilt rear angle | 45 degrees and 5 degrees | 89 % more or 40 degrees |
11 reasons to buy Caterpillar 140H:
Operation
Hydraulic system fluid volume | 80 l. and 75.7 l. | 5 % more or 4.3 l. |
Front axle standard operating weight | 4138 kg and 2540.1 kg | 39 % more or 1597.9 kg |
Rear axle standard operating weight | 10539 kg and 5892.2 kg | 44 % more or 4646.8 kg |
Fuel Capacity | 397 l. and 151.4 l. | 62 % more or 245.6 l. |
Motor
Maximum power | 138 kW and 99.2 kW | 28 % more or 38.8 kW |
Displacement | 10.3 l. and 4 l. | 61 % more or 6.3 l. |
Gear box
Maximum reverse gear | 34.7 km/h and 27.4 km/h | 21 % more or 7.3 km/h |
Forward gears number | 8 and 2 | 75 % more or 6 |
Reverse gears number | 6 and 2 | 67 % more or 4 |
Maximum forward speed | 44 km/h and 27.4 km/h | 38 % more or 16.6 km/h |
Circle
Maximum lifting above ground level | 480 mm and 349.3 mm | 27 % more or 130.7 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 32 degrees and 20 degrees |
Sizes
Between tyres width | 2258.6 mm and 2464 mm |
Dimensional length | 7010.4 mm and 8713 mm |
Wheelbase | 5029.2 mm and 6169 mm |
Blade base | 2069.6 mm and 2561 mm |
Dual axis wheelbase | 1130.8 mm and 1523 mm |
Height to cab upper part | 2767.6 mm and 3131 mm |
Operation
Overall standard operating weight | 8432.3 kg and 14677 kg |
Motor
Manufacturer | Deutz and Caterpillar |
Model | 2012 and 3176C DITA ATAAC VHP |
Gear box
Transmission type | hydrostatic and powershift transmission with direct drive |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Mouldboard width | 3048 mm and 3658 mm |
Mouldboard height | 482.6 mm and 610 mm |
Images
Sizes
1. Dimensional length | 7010.4 mm | 1. Dimensional length | 8713 mm |
2. Between tyres width | 2258.6 mm | 2. Between tyres width | 2464 mm |
3. Height to cab upper part | 2767.6 mm | 3. Height to cab upper part | 3131 mm |
4. Wheelbase | 5029.2 mm | 4. Wheelbase | 6169 mm |
7. Dual axis wheelbase | 1130.8 mm | 7. Dual axis wheelbase | 1523 mm |
8. Blade base | 2069.6 mm | 8. Blade base | 2561 mm |