vs.

      Mauldin MG618 vs. Caterpillar 16M

      5 reasons to buy Mauldin MG618:

      Steerage

      Turn radius 5.5 m and 8.9 m 38 % less or 3.4 m

      Circle

      Maximum radius outside left tyres 914.4 mm and 2282 mm 60 % less or 1367.6 mm
      Right maximum radius outside tyres 914.4 mm and 2587 mm 65 % less or 1672.6 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 45 degrees and 5 degrees 89 % more or 40 degrees

      11 reasons to buy Caterpillar 16M:

      Operation

      Fuel Capacity 511 l. and 151.4 l. 70 % more or 359.6 l.
      Hydraulic system fluid volume 114 l. and 75.7 l. 34 % more or 38.3 l.
      Front axle standard operating weight 7112 kg and 2540.1 kg 64 % more or 4571.9 kg
      Rear axle standard operating weight 18948 kg and 5892.2 kg 69 % more or 13055.8 kg

      Motor

      Maximum power 232.7 kW and 99.2 kW 57 % more or 133.5 kW
      Displacement 12.5 l. and 4 l. 68 % more or 8.5 l.

      Gear box

      Maximum forward speed 53.9 km/h and 27.4 km/h 49 % more or 26.5 km/h
      Maximum reverse gear 42.6 km/h and 27.4 km/h 36 % more or 15.2 km/h
      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 6 and 2 67 % more or 4

      Circle

      Maximum lifting above ground level 395 mm and 349.3 mm 12 % more or 45.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 32 degrees and 20 degrees

      Sizes

      Height to cab upper part 2767.6 mm and 3703 mm
      Dimensional length 7010.4 mm and 9963 mm
      Between tyres width 2258.6 mm and 3095 mm
      Wheelbase 5029.2 mm and 6985 mm
      Blade base 2069.6 mm and 3069 mm
      Dual axis wheelbase 1130.8 mm and 1841 mm

      Operation

      Tyre size 15-19.5 and 18.00-25 12PR (G-2)
      Overall standard operating weight 8432.3 kg and 26060 kg

      Motor

      Model 2012 and C13 ACERT VHP
      Manufacturer Deutz and Caterpillar

      Gear box

      Transmission type hydrostatic and direct drive, powershift, camshaft

      Front Axle

      Wheel tilt 20 degrees and 18.2 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard width 3048 mm and 4877 mm
      Mouldboard height 482.6 mm and 787 mm

      Images

      Sizes

      3. Height to cab upper part 2767.6 mm 3. Height to cab upper part 3703 mm
      4. Wheelbase 5029.2 mm 4. Wheelbase 6985 mm
      7. Dual axis wheelbase 1130.8 mm 7. Dual axis wheelbase 1841 mm
      8. Blade base 2069.6 mm 8. Blade base 3069 mm
      1. Dimensional length 7010.4 mm 1. Dimensional length 9963 mm
      2. Between tyres width 2258.6 mm 2. Between tyres width 3095 mm