vs.

      Mauldin MG618 vs. John Deere 770CH

      5 reasons to buy Mauldin MG618:

      Steerage

      Turn radius 5.5 m and 6.7 m 18 % less or 1.2 m

      Operation

      Hydraulic system fluid volume 75.7 l. and 59 l. 22 % more or 16.7 l.

      Circle

      Right maximum radius outside tyres 914.4 mm and 2110 mm 57 % less or 1195.6 mm
      Maximum radius outside left tyres 914.4 mm and 2160 mm 58 % less or 1245.6 mm
      Blade tilt rear angle 45 degrees and 5 degrees 89 % more or 40 degrees

      12 reasons to buy John Deere 770CH:

      Operation

      Front axle standard operating weight 3987.1 kg and 2540.1 kg 36 % more or 1447.0 kg
      Rear axle standard operating weight 10301.1 kg and 5892.2 kg 43 % more or 4408.9 kg
      Fuel Capacity 401.3 l. and 151.4 l. 62 % more or 249.9 l.

      Motor

      Displacement 8.1 l. and 4 l. 51 % more or 4.1 l.
      Maximum power 152.9 kW and 99.2 kW 35 % more or 53.7 kW
      Effective drives torque 1-2 772.8 Nm and 492.6 Nm 36 % more or 280.2 Nm

      Gear box

      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 8 and 2 75 % more or 6
      Maximum forward speed 41.5 km/h and 27.4 km/h 34 % more or 14.1 km/h
      Maximum reverse gear 41.5 km/h and 27.4 km/h 34 % more or 14.1 km/h

      Circle

      Maximum lifting above ground level 470 mm and 349.3 mm 26 % more or 120.7 mm
      Blade tilt front angle 49 degrees and 45 degrees 8 % more or 4 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 32 degrees and 25 degrees

      Sizes

      Height to cab upper part 2767.6 mm and 3120 mm
      Dimensional length 7010.4 mm and 8610 mm
      Between tyres width 2258.6 mm and 2510 mm
      Wheelbase 5029.2 mm and 5970 mm
      Blade base 2069.6 mm and 2670 mm
      Dual axis wheelbase 1130.8 mm and 1540 mm

      Operation

      Tyre size 15-19.5 and 14.00-24
      Operating voltage 12 V and 24 V
      Overall standard operating weight 8432.3 kg and 14288.2 kg

      Motor

      Aspiration turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Deutz and John Deere
      Model 2012 and 6081H

      Gear box

      Transmission type hydrostatic and powershift

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard width 3048 mm and 3657.6 mm
      Mouldboard height 482.6 mm and 609.6 mm

      Images

      Sizes

      1. Dimensional length 7010.4 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2258.6 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 2767.6 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 5029.2 mm 4. Wheelbase 5970 mm
      7. Dual axis wheelbase 1130.8 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2069.6 mm 8. Blade base 2670 mm