vs.

      Mauldin MG618 vs. John Deere 772A

      6 reasons to buy Mauldin MG618:

      Steerage

      Turn radius 5.5 m and 6.9 m 20 % less or 1.4 m

      Gear box

      Maximum reverse gear 27.4 km/h and 13.8 km/h 50 % more or 13.6 km/h

      Circle

      Blade tilt front angle 45 degrees and 44 degrees 2 % more or 1 degrees
      Blade tilt rear angle 45 degrees and 10 degrees 78 % more or 35 degrees
      Maximum radius outside left tyres 914.4 mm and 2280 mm 60 % less or 1365.6 mm
      Right maximum radius outside tyres 914.4 mm and 2250 mm 59 % less or 1335.6 mm

      10 reasons to buy John Deere 772A:

      Operation

      Front axle standard operating weight 4189.8 kg and 2540.1 kg 39 % more or 1649.7 kg
      Rear axle standard operating weight 9827.5 kg and 5892.2 kg 40 % more or 3935.3 kg
      Fuel Capacity 265 l. and 151.4 l. 43 % more or 113.6 l.
      Hydraulic system fluid volume 155.2 l. and 75.7 l. 51 % more or 79.5 l.

      Motor

      Maximum power 111.9 kW and 99.2 kW 11 % more or 12.7 kW
      Displacement 7.6 l. and 4 l. 47 % more or 3.6 l.

      Gear box

      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 40.4 km/h and 27.4 km/h 32 % more or 13.0 km/h

      Circle

      Maximum lifting above ground level 432 mm and 349.3 mm 19 % more or 82.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 32 degrees and 25 degrees

      Sizes

      Height to cab upper part 2767.6 mm and 3200 mm
      Dimensional length 7010.4 mm and 8470 mm
      Between tyres width 2258.6 mm and 2440 mm
      Wheelbase 5029.2 mm and 5970 mm
      Blade base 2069.6 mm and 2720 mm
      Dual axis wheelbase 1130.8 mm and 1540 mm

      Operation

      Tyre size 15-19.5 and 14.00-24
      Operating voltage 12 V and 24 V
      Overall standard operating weight 8432.3 kg and 14017.4 kg

      Motor

      Model 2012 and 6-466A
      Aspiration turbocharging and cooling at the outlet and Turbocharging with intercooler
      Manufacturer Deutz and John Deere

      Gear box

      Transmission type hydrostatic and powershift

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard width 3048 mm and 3657.6 mm
      Mouldboard height 482.6 mm and 609.6 mm

      Images

      Sizes

      4. Wheelbase 5029.2 mm 4. Wheelbase 5970 mm
      7. Dual axis wheelbase 1130.8 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2069.6 mm 8. Blade base 2720 mm
      1. Dimensional length 7010.4 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2258.6 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 2767.6 mm 3. Height to cab upper part 3200 mm