vs.

      Mauldin MG618 vs. Volvo G960

      4 reasons to buy Mauldin MG618:

      Steerage

      Turn radius 5.5 m and 7265 m 100 % less or 7259.5 m

      Circle

      Blade tilt rear angle 45 degrees and 6 degrees 87 % more or 39 degrees
      Maximum radius outside left tyres 914.4 mm and 2020 mm 55 % less or 1105.6 mm
      Right maximum radius outside tyres 914.4 mm and 2010 mm 55 % less or 1095.6 mm

      10 reasons to buy Volvo G960:

      Operation

      Front axle standard operating weight 5100 kg and 2540.1 kg 50 % more or 2559.9 kg
      Rear axle standard operating weight 12450 kg and 5892.2 kg 53 % more or 6557.8 kg
      Fuel Capacity 404 l. and 151.4 l. 63 % more or 252.6 l.
      Hydraulic system fluid volume 91 l. and 75.7 l. 17 % more or 15.3 l.

      Motor

      Maximum power 180.5 kW and 99.2 kW 45 % more or 81.3 kW
      Displacement 7.2 l. and 4 l. 44 % more or 3.2 l.

      Gear box

      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 45.4 km/h and 27.4 km/h 40 % more or 18.0 km/h
      Maximum reverse gear 32 km/h and 27.4 km/h 14 % more or 4.6 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 32 degrees and 23 degrees

      Sizes

      Height to cab upper part 2767.6 mm and 3225 mm
      Dimensional length 7010.4 mm and 9150 mm
      Between tyres width 2258.6 mm and 2537 mm
      Wheelbase 5029.2 mm and 6280 mm
      Blade base 2069.6 mm and 2650 mm

      Operation

      Overall standard operating weight 8432.3 kg and 17550 kg
      Tyre size 15-19.5 and 14:00 x 24, G-2
      Operating voltage 12 V and 24 V

      Motor

      Manufacturer Deutz and Volvo
      Model 2012 and D7E
      Aspiration turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type hydrostatic and HTE 840, Sequential direct drive gearbox with shifting under load Volvo

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3048 mm and 3657.6 mm
      Mouldboard height 482.6 mm and 635 mm

      Circle

      Blade tilt front angle 45 degrees and 45 degrees

      Images

      Sizes

      8. Blade base 2069.6 mm 8. Blade base 2650 mm
      1. Dimensional length 7010.4 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2258.6 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 2767.6 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 5029.2 mm 4. Wheelbase 6280 mm