vs.

      Mauldin MG622 vs. Case 885B DHP

      2 reasons to buy Mauldin MG622:

      Steerage

      Turn radius 6.2 m and 7.3 m 15 % less or 1.1 m

      Gear box

      Maximum reverse gear 35.4 km/h and 30.6 km/h 14 % more or 4.8 km/h

      10 reasons to buy Case 885B DHP:

      Operation

      Hydraulic system fluid volume 179.8 l. and 94.6 l. 47 % more or 85.2 l.
      Front axle standard operating weight 5668.1 kg and 3036.8 kg 46 % more or 2631.3 kg
      Rear axle standard operating weight 12687 kg and 7323.2 kg 42 % more or 5363.8 kg
      Fuel Capacity 340.7 l. and 151.4 l. 56 % more or 189.3 l.

      Motor

      Displacement 6.7 l. and 4 l. 40 % more or 2.7 l.

      Gear box

      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 43 km/h and 35.4 km/h 18 % more or 7.6 km/h

      Dump

      Maximum cutting depth 711.2 mm and 596.9 mm 16 % more or 114.3 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 358.1 mm 19 % more or 86.4 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 24 degrees and 25 degrees

      Sizes

      Between tyres width 2532.9 mm and 2650 mm
      Wheelbase 5282.2 mm and 6219 mm
      Blade base 2362.2 mm and 2562 mm
      Dimensional length 8345.4 mm and 8534 mm
      Dual axis wheelbase 1447.8 mm and 1624 mm
      Height to cab upper part 2947.4 mm and 3340 mm

      Operation

      Tyre size 15.5-25 and 20.5-25
      Operating voltage 12 V and 24 V
      Overall standard operating weight 10360.1 kg and 18355.1 kg

      Motor

      Manufacturer Deutz and Case
      Model 2012 and FPT 6.7L
      Aspiration turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type hydrostatic and powershift

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 15.3 degrees

      Dump

      Lateral right shift 679.5 mm and 685.8 mm
      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 558.8 mm and 600 mm
      Left lateral displacement 793.8 mm and 533.4 mm

      Circle

      Diameter 1371.6 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 8345.4 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2532.9 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 2947.4 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5282.2 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1447.8 mm 7. Dual axis wheelbase 1624 mm
      8. Blade base 2362.2 mm 8. Blade base 2562 mm