vs.

      Mitsubishi MG130-E vs. Caterpillar 140M

      3 reasons to buy Mitsubishi MG130-E:

      Operation

      Hydraulic system fluid volume 67 l. and 60 l. 10 % more or 7 l.

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 106 l/min and 210 l/min 50 % less or 104 l/min

      11 reasons to buy Caterpillar 140M:

      Operation

      Fuel Capacity 416 l. and 115 l. 72 % more or 301 l.
      Circular gearbox fluid volume 7 l. and 3.5 l. 50 % more or 3.5 l.
      Each tandem case fluid volume 64 l. and 26 l. 59 % more or 38 l.

      Motor

      Maximum power 136.5 kW and 70.8 kW 48 % more or 65.7 kW
      Displacement 7.2 l. and 4.2 l. 42 % more or 3.0 l.
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 46.6 km/h and 32.6 km/h 30 % more or 14.0 km/h
      Maximum reverse gear 36.8 km/h and 33.2 km/h 10 % more or 3.6 km/h
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 571 mm and 480 mm 16 % more or 91 mm

      Circle

      Maximum lifting above ground level 480 mm and 400 mm 17 % more or 80 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 20 degrees

      Sizes

      Height to cab upper part 3010 mm and 3293 mm
      Dimensional length 6910 mm and 8713 mm
      Between tyres width 2140 mm and 2493 mm
      Wheelbase 4900 mm and 6121 mm
      Blade base 2135 mm and 2552 mm

      Operation

      Overall standard operating weight 10060 kg and 15130 kg

      Motor

      Manufacturer Mitsubishi and Caterpillar
      Model SK4-T and C7 ACERT VHP

      Hydraulic system

      Type of pump Pump with double gear and variable displacement piston pump
      Overflow valve pressure 17.2 kPa and 24150 kPa

      Gear box

      Reverse gears number 6 and 6
      Transmission type planetary gear and direct drive, powershift, camshaft

      Front Axle

      General fluctuations 30 degrees and 32 degrees
      Wheel tilt 20 degrees and 18 degrees

      Dump

      Mouldboard width 3100 mm and 3700 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 19 mm and 22 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Blade tilt front angle 40 degrees and 40 degrees
      Left shift 1470 mm and 695 mm
      Right shift 1230 mm and 728 mm

      Images

      Sizes

      3. Height to cab upper part 3010 mm 3. Height to cab upper part 3293 mm
      4. Wheelbase 4900 mm 4. Wheelbase 6121 mm
      8. Blade base 2135 mm 8. Blade base 2552 mm
      1. Dimensional length 6910 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2493 mm