vs.

      Mitsubishi MG130-E vs. Volvo G726 VHP

      3 reasons to buy Mitsubishi MG130-E:

      Hydraulic system

      Pump flow rate 106 l/min and 191 l/min 45 % less or 85 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.2 km/h and 32.8 km/h 1 % more or 0.4 km/h

      14 reasons to buy Volvo G726 VHP:

      Operation

      Fuel Capacity 378.5 l. and 115 l. 70 % more or 263.5 l.
      Hydraulic system fluid volume 90 l. and 67 l. 26 % more or 23 l.
      Transmission fluid volume 38 l. and 23 l. 39 % more or 15 l.
      Each tandem case fluid volume 100 l. and 26 l. 74 % more or 74 l.
      Generator current strength 75 amperes and 30 amperes 60 % more or 45 amperes

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Maximum power 145.4 kW and 70.8 kW 51 % more or 74.6 kW
      Displacement 8.3 l. and 4.2 l. 49 % more or 4.1 l.

      Gear box

      Maximum forward speed 45.9 km/h and 32.6 km/h 29 % more or 13.3 km/h
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 610 mm and 480 mm 21 % more or 130 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 400 mm 10 % more or 44.5 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 22 degrees

      Sizes

      Wheelbase 4900 mm and 6096 mm
      Blade base 2135 mm and 2591 mm
      Height to cab upper part 3010 mm and 3099 mm
      Dimensional length 6910 mm and 8484 mm
      Between tyres width 2140 mm and 2540 mm

      Operation

      Overall standard operating weight 10060 kg and 15218 kg
      Tyre size 10.00-20-12 and 14.00 x 24, G-2
      Operating voltage 24 V and 12 V

      Motor

      Manufacturer Mitsubishi and Cummins
      Model SK4-T and 6C8.3

      Hydraulic system

      Type of pump Pump with double gear and hydraulic system with load sensing
      Overflow valve pressure 17.2 kPa and 17236.9 kPa

      Gear box

      Transmission type planetary gear and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 15 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3100 mm and 3657.6 mm
      Mouldboard height 610 mm and 635 mm
      Mouldboard thickness 19 mm and 22.2 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 1470 mm and 774.7 mm
      Right shift 1230 mm and 749.3 mm

      Images

      Sizes

      8. Blade base 2135 mm 8. Blade base 2591 mm
      1. Dimensional length 6910 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3010 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 4900 mm 4. Wheelbase 6096 mm