- Home/
- Comparison/
- Grader/
- Mitsubishi MG230-E vs. Case 885B DHP
Mitsubishi MG230-E vs. Case 885B DHP
6 reasons to buy Mitsubishi MG230-E:
Operation
Transmission fluid volume | 23 l. and 22 l. | 4 % more or 1 l. |
Circular gearbox fluid volume | 3.5 l. and 2.8 l. | 20 % more or 0.7 l. |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Hydraulic system
Pump flow rate | 110 l/min and 185.5 l/min | 41 % less or 75.5 l/min |
Gear box
Maximum reverse gear | 33.2 km/h and 30.6 km/h | 8 % more or 2.6 km/h |
Reverse gears number | 6 and 4 | 33 % more or 2 |
10 reasons to buy Case 885B DHP:
Operation
Generator current strength | 90 amperes and 40 amperes | 56 % more or 50 amperes |
Fuel Capacity | 340.7 l. and 210 l. | 38 % more or 130.7 l. |
Oil system fluid volume | 16.7 l. and 16 l. | 4 % more or 0.7 l. |
Hydraulic system fluid volume | 179.8 l. and 110 l. | 39 % more or 69.8 l. |
Each tandem case fluid volume | 60.2 l. and 28 l. | 53 % more or 32.2 l. |
Motor
Displacement | 6.7 l. and 5.9 l. | 12 % more or 0.8 l. |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 43 km/h and 32.6 km/h | 24 % more or 10.4 km/h |
Front Axle
Clearance | 622 mm and 480 mm | 23 % more or 142 mm |
Circle
Maximum lifting above ground level | 444.5 mm and 430 mm | 3 % more or 14.5 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 26 degrees and 25 degrees |
Sizes
Blade base | 2185 mm and 2562 mm |
Height to cab upper part | 3030 mm and 3340 mm |
Dimensional length | 7325 mm and 8534 mm |
Between tyres width | 2140 mm and 2650 mm |
Wheelbase | 5300 mm and 6219 mm |
Operation
Tyre size | 13.00-24-12 and 20.5-25 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 11060 kg and 18355.1 kg |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Mitsubishi and Case |
Model | 6D34-TE1 and FPT 6.7L |
Hydraulic system
Type of pump | Pump with double gear and load sensing, pressure control, with locking in the middle position |
Gear box
Transmission type | planetary gear and powershift |
Front Axle
Wheel tilt | 20 degrees and 20 degrees |
General fluctuations | 30 degrees and 15.3 degrees |
Dump
Mouldboard height | 610 mm and 600 mm |
Mouldboard thickness | 19 mm and 22.2 mm |
Mouldboard width | 3100 mm and 4267.2 mm |
Circle
Rotating | 360 degrees and 360 degrees |
Images
Sizes
8. Blade base | 2185 mm | 8. Blade base | 2562 mm |
1. Dimensional length | 7325 mm | 1. Dimensional length | 8534 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 2650 mm |
3. Height to cab upper part | 3030 mm | 3. Height to cab upper part | 3340 mm |
4. Wheelbase | 5300 mm | 4. Wheelbase | 6219 mm |