vs.

      Mitsubishi MG230-E vs. John Deere 770D

      4 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 53 l. 52 % more or 57 l.
      Transmission fluid volume 23 l. and 22.7 l. 1 % more or 0.3 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Hydraulic system

      Pump flow rate 110 l/min and 207 l/min 47 % less or 97 l/min

      13 reasons to buy John Deere 770D:

      Operation

      Generator current strength 100 amperes and 40 amperes 60 % more or 60 amperes
      Fuel Capacity 401.2 l. and 210 l. 48 % more or 191.2 l.
      Circular gearbox fluid volume 5.7 l. and 3.5 l. 39 % more or 2.2 l.
      Each tandem case fluid volume 75.7 l. and 28 l. 63 % more or 47.7 l.

      Motor

      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.
      Maximum power 160.3 kW and 85.8 kW 46 % more or 74.5 kW

      Gear box

      Maximum reverse gear 41.6 km/h and 33.2 km/h 20 % more or 8.4 km/h
      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 6 25 % more or 2
      Maximum forward speed 41.6 km/h and 32.6 km/h 22 % more or 9.0 km/h

      Front Axle

      Clearance 638 mm and 480 mm 25 % more or 158 mm

      Circle

      Maximum lifting above ground level 470 mm and 430 mm 9 % more or 40 mm
      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 22 degrees

      Sizes

      Height to cab upper part 3030 mm and 3180 mm
      Dimensional length 7325 mm and 8804 mm
      Between tyres width 2140 mm and 2510 mm
      Wheelbase 5300 mm and 6120 mm
      Blade base 2185 mm and 2568 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 11060 kg and 14819 kg
      Tyre size 13.00-24-12 and 14.00R24 Radial PR

      Motor

      Manufacturer Mitsubishi and John Deere
      Model 6D34-TE1 and 6081H
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Pump with double gear and variable displacement piston pump
      Overflow valve pressure 17.2 kPa and 18960.6 kPa

      Gear box

      Transmission type planetary gear and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard width 3100 mm and 3660 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 19 mm and 22 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Rotating 360 degrees and 360 degrees
      Left shift 1650 mm and 787 mm
      Right shift 1680 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 7325 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3030 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 5300 mm 4. Wheelbase 6120 mm
      8. Blade base 2185 mm 8. Blade base 2568 mm