vs.

      Mitsubishi MG230-E vs. John Deere JD670

      9 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 106 l. 4 % more or 4 l.
      Circular gearbox fluid volume 3.5 l. and 2.8 l. 20 % more or 0.7 l.
      Each tandem case fluid volume 28 l. and 15.1 l. 46 % more or 12.9 l.

      Motor

      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev

      Hydraulic system

      Pump flow rate 110 l/min and 132 l/min 17 % less or 22 l/min

      Gear box

      Maximum reverse gear 33.2 km/h and 12.3 km/h 63 % more or 20.9 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Circle

      Maximum lifting above ground level 430 mm and 409 mm 5 % more or 21 mm
      Blade tilt front angle 40 degrees and 35 degrees 12 % more or 5 degrees

      7 reasons to buy John Deere JD670:

      Operation

      Fuel Capacity 227 l. and 210 l. 7 % more or 17 l.
      Oil system fluid volume 18.9 l. and 16 l. 15 % more or 2.9 l.

      Motor

      Maximum power 93.2 kW and 85.8 kW 8 % more or 7.4 kW
      Displacement 6.8 l. and 5.9 l. 13 % more or 0.9 l.

      Gear box

      Maximum forward speed 38.4 km/h and 32.6 km/h 15 % more or 5.8 km/h
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 559 mm and 480 mm 14 % more or 79 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 25 degrees

      Sizes

      Height to cab upper part 3030 mm and 3200 mm
      Dimensional length 7325 mm and 8310 mm
      Between tyres width 2140 mm and 2340 mm
      Wheelbase 5300 mm and 5970 mm
      Blade base 2185 mm and 2540 mm

      Operation

      Overall standard operating weight 11060 kg and 11716 kg
      Tyre size 13.00-24-12 and 13.00-24
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Mitsubishi and John Deere
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Pump with double gear and Variable displacement with locking in the middle position
      Overflow valve pressure 17.2 kPa and 15513.2 kPa

      Gear box

      Transmission type planetary gear and powershift

      Front Axle

      General fluctuations 30 degrees and 30 degrees
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Mouldboard thickness 19 mm and 22 mm
      Mouldboard width 3100 mm and 3.7 mm
      Mouldboard height 610 mm and 610 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7325 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2340 mm
      3. Height to cab upper part 3030 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5300 mm 4. Wheelbase 5970 mm
      8. Blade base 2185 mm 8. Blade base 2540 mm