vs.

      Mitsubishi MG230-E vs. New Holland G140

      7 reasons to buy Mitsubishi MG230-E:

      Operation

      Transmission fluid volume 23 l. and 17.8 l. 23 % more or 5.2 l.
      Circular gearbox fluid volume 3.5 l. and 2.8 l. 20 % more or 0.7 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 110 l/min and 185.5 l/min 41 % less or 75.5 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.2 km/h and 28.5 km/h 14 % more or 4.7 km/h

      Circle

      Blade tilt front angle 40 degrees and 5 degrees 87 % more or 35 degrees

      11 reasons to buy New Holland G140:

      Operation

      Generator current strength 80 amperes and 40 amperes 50 % more or 40 amperes
      Fuel Capacity 340.7 l. and 210 l. 38 % more or 130.7 l.
      Hydraulic system fluid volume 179.8 l. and 110 l. 39 % more or 69.8 l.
      Each tandem case fluid volume 29.1 l. and 28 l. 4 % more or 1.1 l.

      Motor

      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.
      Maximum power 119.3 kW and 85.8 kW 28 % more or 33.5 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 42.8 km/h and 32.6 km/h 24 % more or 10.2 km/h

      Front Axle

      Clearance 622 mm and 480 mm 23 % more or 142 mm

      Circle

      Maximum lifting above ground level 445 mm and 430 mm 3 % more or 15 mm
      Blade tilt rear angle 42 degrees and 5 degrees 88 % more or 37 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 25 degrees

      Sizes

      Height to cab upper part 3030 mm and 3140 mm
      Between tyres width 2140 mm and 2510 mm
      Dimensional length 7325 mm and 8521 mm
      Wheelbase 5300 mm and 6219 mm
      Blade base 2185 mm and 2562 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 11060 kg and 13570.6 kg
      Tyre size 13.00-24-12 and 14.00X24 10 layers G2

      Motor

      Cylinders number 6 and 6
      Manufacturer Mitsubishi and Cummins
      Model 6D34-TE1 and QSB 6.7L

      Hydraulic system

      Type of pump Pump with double gear and variable displacement piston pump
      Overflow valve pressure 17.2 kPa and 17926.4 kPa

      Gear box

      Transmission type planetary gear and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 17.5 degrees
      General fluctuations 30 degrees and 19 degrees

      Dump

      Mouldboard height 610 mm and 622 mm
      Mouldboard thickness 19 mm and 22 mm
      Mouldboard width 3100 mm and 3657.6 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2185 mm 8. Blade base 2562 mm
      1. Dimensional length 7325 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3030 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 5300 mm 4. Wheelbase 6219 mm