vs.

      Mitsubishi MG230-E vs. Volvo G960

      5 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 91 l. 17 % more or 19 l.

      Motor

      Power measured at 2500 rev / min and 1800 rev / min 28 % more or 700 rev

      Hydraulic system

      Pump flow rate 110 l/min and 208 l/min 47 % less or 98 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.2 km/h and 32 km/h 4 % more or 1.2 km/h

      12 reasons to buy Volvo G960:

      Operation

      Transmission fluid volume 61 l. and 23 l. 62 % more or 38 l.
      Each tandem case fluid volume 100 l. and 28 l. 72 % more or 72 l.
      Generator current strength 80 amperes and 40 amperes 50 % more or 40 amperes
      Fuel Capacity 404 l. and 210 l. 48 % more or 194 l.
      Oil system fluid volume 21.5 l. and 16 l. 26 % more or 5.5 l.

      Motor

      Maximum power 180.5 kW and 85.8 kW 52 % more or 94.7 kW
      Displacement 7.2 l. and 5.9 l. 18 % more or 1.3 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 45.4 km/h and 32.6 km/h 28 % more or 12.8 km/h

      Front Axle

      Clearance 610 mm and 480 mm 21 % more or 130 mm

      Circle

      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 23 degrees

      Sizes

      Height to cab upper part 3030 mm and 3225 mm
      Dimensional length 7325 mm and 9150 mm
      Between tyres width 2140 mm and 2537 mm
      Wheelbase 5300 mm and 6280 mm
      Blade base 2185 mm and 2650 mm

      Operation

      Tyre size 13.00-24-12 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 11060 kg and 17550 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Mitsubishi and Volvo
      Model 6D34-TE1 and D7E

      Hydraulic system

      Overflow valve pressure 17.2 kPa and 20684.3 kPa
      Type of pump Pump with double gear and axial piston pump

      Gear box

      Transmission type planetary gear and HTE 840, Sequential direct drive gearbox with shifting under load Volvo

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3100 mm and 3657.6 mm
      Mouldboard height 610 mm and 635 mm
      Mouldboard thickness 19 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 1650 mm and 775 mm
      Right shift 1680 mm and 749 mm

      Images

      Sizes

      1. Dimensional length 7325 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3030 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 5300 mm 4. Wheelbase 6280 mm
      8. Blade base 2185 mm 8. Blade base 2650 mm