vs.

      Mitsubishi MG330-E vs. Fiat-Hitachi FG105

      6 reasons to buy Mitsubishi MG330-E:

      Operation

      Circular gearbox fluid volume 3.5 l. and 2.8 l. 20 % more or 0.7 l.
      Each tandem case fluid volume 73 l. and 30.3 l. 58 % more or 42.7 l.

      Hydraulic system

      Pump flow rate 120 l/min and 163 l/min 26 % less or 43 l/min

      Gear box

      Maximum forward speed 42.6 km/h and 42 km/h 1 % more or 0.6 km/h
      Maximum reverse gear 43.3 km/h and 27.4 km/h 37 % more or 15.9 km/h
      Reverse gears number 6 and 3 50 % more or 3

      11 reasons to buy Fiat-Hitachi FG105:

      Operation

      Generator current strength 45 amperes and 40 amperes 11 % more or 5 amperes
      Fuel Capacity 299 l. and 230 l. 23 % more or 69 l.
      Oil system fluid volume 20.3 l. and 13 l. 36 % more or 7.3 l.
      Hydraulic system fluid volume 94.6 l. and 67 l. 29 % more or 27.6 l.
      Transmission fluid volume 25 l. and 23 l. 8 % more or 2 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Maximum power 147 kW and 100.7 kW 31 % more or 46.3 kW
      Displacement 8.3 l. and 7.5 l. 10 % more or 0.8 l.

      Front Axle

      Clearance 635 mm and 555 mm 13 % more or 80 mm

      Circle

      Maximum lifting above ground level 622 mm and 480 mm 23 % more or 142 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 25 degrees

      Sizes

      Height to cab upper part 3130 mm and 3340 mm
      Dimensional length 7820 mm and 8521 mm
      Between tyres width 2450 mm and 2540 mm
      Wheelbase 5700 mm and 1538 mm
      Blade base 2500 mm and 2642 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 14.00-24-12 and 13X24(10PR)

      Motor

      Manufacturer Mitsubishi and Cummins
      Model 6D16-TE1 and 6 CT8.3
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Pump with double gear and fully oil-actuated, variable displacement piston pump
      Overflow valve pressure 17.2 kPa and 2857 kPa

      Gear box

      Transmission type planetary gear and powershift transmission
      Forward gears number 6 and 6

      Front Axle

      Wheel tilt 20 degrees and 17.5 degrees
      General fluctuations 30 degrees and 19 degrees

      Dump

      Mouldboard width 3710 mm and 2762 mm
      Mouldboard height 610 mm and 953 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7820 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2450 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3130 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5700 mm 4. Wheelbase 1538 mm
      8. Blade base 2500 mm 8. Blade base 2642 mm