vs.

      Mitsubishi MG330-E vs. John Deere 772A

      6 reasons to buy Mitsubishi MG330-E:

      Operation

      Each tandem case fluid volume 73 l. and 18.9 l. 74 % more or 54.1 l.

      Hydraulic system

      Pump flow rate 120 l/min and 136.3 l/min 12 % less or 16.3 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 42.6 km/h and 40.4 km/h 5 % more or 2.2 km/h
      Maximum reverse gear 43.3 km/h and 13.8 km/h 68 % more or 29.5 km/h

      Circle

      Maximum lifting above ground level 480 mm and 432 mm 10 % more or 48 mm

      12 reasons to buy John Deere 772A:

      Operation

      Generator current strength 42 amperes and 40 amperes 5 % more or 2 amperes
      Fuel Capacity 265 l. and 230 l. 13 % more or 35 l.
      Oil system fluid volume 18.9 l. and 13 l. 31 % more or 5.9 l.
      Hydraulic system fluid volume 155.2 l. and 67 l. 57 % more or 88.2 l.
      Circular gearbox fluid volume 3.8 l. and 3.5 l. 8 % more or 0.3 l.

      Motor

      Maximum power 111.9 kW and 100.7 kW 10 % more or 11.2 kW
      Displacement 7.6 l. and 7.5 l. 1 % more or 0.1 l.
      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 572 mm and 555 mm 3 % more or 17 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 25 degrees

      Sizes

      Height to cab upper part 3130 mm and 3200 mm
      Dimensional length 7820 mm and 8470 mm
      Between tyres width 2450 mm and 2440 mm
      Wheelbase 5700 mm and 5970 mm
      Blade base 2500 mm and 2720 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 14.00-24-12 and 14.00-24
      Overall standard operating weight 15600 kg and 14017.4 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Mitsubishi and John Deere
      Model 6D16-TE1 and 6-466A

      Hydraulic system

      Type of pump Pump with double gear and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type planetary gear and powershift

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard width 3710 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm

      Circle

      Right shift 1900 mm and 813 mm
      Rotating 360 degrees and 360 degrees
      Left shift 1890 mm and 851 mm

      Images

      Sizes

      1. Dimensional length 7820 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2450 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3130 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5700 mm 4. Wheelbase 5970 mm
      8. Blade base 2500 mm 8. Blade base 2720 mm