vs.

      Mitsubishi MG430-E vs. John Deere 570B

      14 reasons to buy Mitsubishi MG430-E:

      Operation

      Oil system fluid volume 16 l. and 11 l. 31 % more or 5 l.
      Hydraulic system fluid volume 67 l. and 53 l. 21 % more or 14 l.
      Circular gearbox fluid volume 3.5 l. and 1.4 l. 60 % more or 2.1 l.
      Fuel Capacity 210 l. and 189 l. 10 % more or 21 l.
      Each tandem case fluid volume 28 l. and 19 l. 32 % more or 9 l.

      Motor

      Maximum power 115.6 kW and 67.1 kW 42 % more or 48.5 kW
      Displacement 11.9 l. and 5.9 l. 50 % more or 6.0 l.

      Hydraulic system

      Pump flow rate 100 l/min and 102 l/min 2 % less or 2 l/min

      Gear box

      Maximum forward speed 45.1 km/h and 34.8 km/h 23 % more or 10.3 km/h
      Maximum reverse gear 45.9 km/h and 11.4 km/h 75 % more or 34.5 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Front Axle

      Clearance 600 mm and 597 mm 0 % more or 3 mm

      Circle

      Blade tilt front angle 40 degrees and 32 degrees 20 % more or 8 degrees
      Maximum lifting above ground level 490 mm and 330 mm 33 % more or 160 mm

      3 reasons to buy John Deere 570B:

      Operation

      Generator current strength 42 amperes and 40 amperes 5 % more or 2 amperes

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      Neutral reasons:

      Steerage

      Left and right hinge connection 29 degrees and 22 degrees

      Sizes

      Height to cab upper part 3130 mm and 3090 mm
      Dimensional length 8505 mm and 7430 mm
      Between tyres width 2470 mm and 2410 mm
      Wheelbase 6250 mm and 5280 mm
      Blade base 2670 mm and 2340 mm

      Operation

      Overall standard operating weight 16400 kg and 9174 kg
      Tyre size 14.00-24-12 and 13.00-24
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Mitsubishi and John Deere
      Model 6D24-E1 and 6059D
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Pump with double gear and Variable displacement volume with controlled pressure

      Gear box

      Transmission type planetary gear and powershift

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard height 610 mm and 559 mm
      Mouldboard thickness 22 mm and 16 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8505 mm 1. Dimensional length 7430 mm
      2. Between tyres width 2470 mm 2. Between tyres width 2410 mm
      3. Height to cab upper part 3130 mm 3. Height to cab upper part 3090 mm
      4. Wheelbase 6250 mm 4. Wheelbase 5280 mm
      8. Blade base 2670 mm 8. Blade base 2340 mm