- Home/
- Comparison/
- Grader/
- Mitsubishi MG460 VHP vs. John Deere 670D
Mitsubishi MG460 VHP vs. John Deere 670D
6 reasons to buy Mitsubishi MG460 VHP:
Steerage
Turn radius | 6.9 m and 7 m | 1 % less or 0.1 m |
Motor
Effective speeds output 1-2 | 116 kW and 108 kW | 7 % more or 8 kW |
Displacement | 12 l. and 6.8 l. | 43 % more or 5.2 l. |
Circle
Maximum radius outside left tyres | 1970 mm and 2100 mm | 6 % less or 130 mm |
Right maximum radius outside tyres | 2000 mm and 2080 mm | 4 % less or 80 mm |
Blade tilt rear angle | 81 degrees and 5 degrees | 94 % more or 76 degrees |
3 reasons to buy John Deere 670D:
Motor
Effective speeds output 7-8 | 138 kW and 6 kW | 96 % more or 132 kW |
Gear box
Maximum reverse gear | 40 km/h and 37 km/h | 7 % more or 3 km/h |
Circle
Blade tilt front angle | 42 degrees and 36 degrees | 14 % more or 6 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 29 degrees and 22 degrees |
Sizes
Height to cab upper part | 3425 mm and 3180 mm |
Dimensional length | 8565 mm and 8804 mm |
Between tyres width | 2420 mm and 2510 mm |
Operation
Overall standard operating weight | 17700 kg and 14519 kg |
Motor
Model | 6D24-TUN and 6068H |
Maximum power | 138 kW and 138 kW |
Power measured at | 2000 rev / min and 2000 rev / min |
Manufacturer | Mitsubishi and John Deere |
Gear box
Transmission type | powershift transmission and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Reverse gears number | 8 and 8 |
Maximum forward speed | 40 km/h and 40 km/h |
Front Axle
Wheel tilt | 20 degrees and 20 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Mouldboard width | 3710 mm and 3660 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 19 mm and 22 mm |
Circle
Maximum lifting above ground level | 470 mm and 470 mm |
Images
Sizes
1. Dimensional length | 8565 mm | 1. Dimensional length | 8804 mm |
2. Between tyres width | 2420 mm | 2. Between tyres width | 2510 mm |
3. Height to cab upper part | 3425 mm | 3. Height to cab upper part | 3180 mm |