vs.

      Mitsubishi MG530-E vs. Caterpillar 16H

      4 reasons to buy Mitsubishi MG530-E:

      Hydraulic system

      Pump flow rate 100 l/min and 254 l/min 61 % less or 154 l/min

      Gear box

      Maximum reverse gear 47.5 km/h and 45.7 km/h 4 % more or 1.8 km/h

      Circle

      Blade tilt rear angle 9 degrees and 5 degrees 44 % more or 4 degrees
      Maximum lifting above ground level 460 mm and 419 mm 9 % more or 41 mm

      11 reasons to buy Caterpillar 16H:

      Operation

      Generator current strength 75 amperes and 40 amperes 47 % more or 35 amperes
      Fuel Capacity 492 l. and 275 l. 44 % more or 217 l.
      Hydraulic system fluid volume 129 l. and 67 l. 48 % more or 62 l.
      Circular gearbox fluid volume 8 l. and 3.5 l. 56 % more or 4.5 l.
      Each tandem case fluid volume 121 l. and 85 l. 30 % more or 36 l.

      Motor

      Displacement 11.9 l. and 11.1 l. 7 % more or 0.8 l.
      Maximum power 212.5 kW and 138 kW 35 % more or 74.5 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 6 25 % more or 2
      Maximum forward speed 48.1 km/h and 46.6 km/h 3 % more or 1.5 km/h

      Front Axle

      Clearance 732 mm and 652 mm 11 % more or 80 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 20 degrees

      Sizes

      Height to cab upper part 3140 mm and 3524 mm
      Dimensional length 8745 mm and 9994 mm
      Between tyres width 2665 mm and 3077 mm
      Wheelbase 6250 mm and 6960 mm
      Blade base 2670 mm and 3071 mm

      Operation

      Overall standard operating weight 18225 kg and 24740 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Mitsubishi and Caterpillar
      Model 6D22-T and 3196 ETA
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Pump with double gear and axial piston
      Overflow valve pressure 17.2 kPa and 24150 kPa

      Gear box

      Transmission type planetary gear and direct drive, powershift, of planetary type

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard height 720 mm and 787 mm
      Mouldboard thickness 22 mm and 25 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Left shift 2325 mm and 690 mm
      Right shift 2195 mm and 560 mm

      Images

      Sizes

      1. Dimensional length 8745 mm 1. Dimensional length 9994 mm
      2. Between tyres width 2665 mm 2. Between tyres width 3077 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3524 mm
      4. Wheelbase 6250 mm 4. Wheelbase 6960 mm
      8. Blade base 2670 mm 8. Blade base 3071 mm