vs.

      New Holland F106.6 vs. Caterpillar 160H

      6 reasons to buy New Holland F106.6:

      Operation

      Hydraulic system fluid volume 170 l. and 80 l. 53 % more or 90 l.
      Each tandem case fluid volume 74 l. and 64 l. 14 % more or 10 l.
      Generator current strength 70 amperes and 35 amperes 50 % more or 35 amperes

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 95 l/min and 260 l/min 63 % less or 165 l/min

      Circle

      Maximum radius outside left tyres 2150 mm and 2223 mm 3 % less or 73 mm

      16 reasons to buy Caterpillar 160H:

      Steerage

      Turn radius 7.4 m and 7250 m 100 % less or 7242.6 m

      Operation

      Front axle standard operating weight 4589 kg and 2905 kg 37 % more or 1684 kg
      Rear axle standard operating weight 11691 kg and 7425 kg 36 % more or 4266 kg
      Front axle maximum operating weight 8311 kg and 3800 kg 54 % more or 4511 kg
      Rear axle maximum operating weight 14970 kg and 8200 kg 45 % more or 6770 kg
      Fuel Capacity 397 l. and 189 l. 52 % more or 208 l.

      Motor

      Effective speeds output 5-6 149.1 kW and 100.7 kW 32 % more or 48.4 kW
      Maximum power 149.1 kW and 100.7 kW 32 % more or 48.4 kW
      Displacement 10.3 l. and 5.9 l. 43 % more or 4.4 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 43.6 km/h and 37.8 km/h 13 % more or 5.8 km/h
      Maximum reverse gear 34.4 km/h and 27.9 km/h 19 % more or 6.5 km/h

      Dump

      Maximum cutting depth 770 mm and 450 mm 42 % more or 320 mm

      Circle

      Right maximum radius outside tyres 2261 mm and 2490 mm 9 % less or 229 mm
      Maximum lifting above ground level 452 mm and 400 mm 12 % more or 52 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 28 degrees and 20 degrees

      Sizes

      Height to cab upper part 3184 mm and 3356 mm
      Dimensional length 8888 mm and 10097 mm
      Between tyres width 2307 mm and 2460 mm
      Wheelbase 5243 mm and 6169 mm
      Dual axis wheelbase 1250 mm and 1523 mm

      Operation

      Overall standard operating weight 10330 kg and 16280 kg
      Tyre size 405/70R20 and 10-24 12PR
      Operating voltage 24 V and 24 V
      Total maximum operating weight 11500 kg and 23281 kg

      Motor

      Cylinders number 6 and 6
      Model CNH 4-stroke cycle, naturally aspirated diesel engine and 3176C ATAAC

      Hydraulic system

      Overflow valve pressure 20000 kPa and 24150 kPa
      Type of pump Axial cam pump, variable displacement piston pump and Axial-piston pump

      Front Axle

      Wheel tilt 22 degrees and 18 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Left lateral displacement 700 mm and 851 mm
      Lateral right shift 500 mm and 943 mm
      Mouldboard width 3355 mm and 4267 mm
      Mouldboard height 152 mm and 686 mm
      Mouldboard thickness 19 mm and 25 mm

      Circle

      Left shift 700 mm and 848 mm
      Right shift 500 mm and 881 mm

      Images

      Sizes

      4. Wheelbase 5243 mm 4. Wheelbase 6169 mm
      7. Dual axis wheelbase 1250 mm 7. Dual axis wheelbase 1523 mm
      1. Dimensional length 8888 mm 1. Dimensional length 10097 mm
      2. Between tyres width 2307 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3184 mm 3. Height to cab upper part 3356 mm