- Home/
- Comparison/
- Grader/
- New Holland F106.6 vs. Komatsu GD530AW-2C
New Holland F106.6 vs. Komatsu GD530AW-2C
3 reasons to buy New Holland F106.6:
Sizes
Rear ground clearance | 307 mm and 279 mm | 9 % more or 28 mm |
Gear box
Maximum reverse gear | 27.9 km/h and 21.9 km/h | 22 % more or 6.0 km/h |
Front Axle
Clearance | 485 mm and 279 mm | 42 % more or 206 mm |
5 reasons to buy Komatsu GD530AW-2C:
Operation
Fuel Capacity | 340 l. and 189 l. | 44 % more or 151 l. |
Motor
Power measured at | 2500 rev / min and 2100 rev / min | 16 % more or 400 rev |
Effective speeds output 5-6 | 107 kW and 100.7 kW | 6 % more or 6.3 kW |
Maximum power | 107 kW and 100.7 kW | 6 % more or 6.3 kW |
Gear box
Maximum forward speed | 41 km/h and 37.8 km/h | 8 % more or 3.2 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 28 degrees and 20 degrees |
Sizes
Height to cab upper part | 3184 mm and 3099 mm |
Dimensional length | 8888 mm and 8433 mm |
Between tyres width | 2307 mm and 2413 mm |
Wheelbase | 5243 mm and 5918 mm |
Blade base | 1981 mm and 2489 mm |
Dual axis wheelbase | 1250 mm and 1550 mm |
Operation
Overall standard operating weight | 10330 kg and 13860 kg |
Tyre size | 405/70R20 and 13.00-24-10PR |
Motor
Model | CNH 4-stroke cycle, naturally aspirated diesel engine and S6D102 |
Cylinders number | 6 and 6 |
Displacement | 5.9 l. and 5.9 l. |
Gear box
Forward gears number | 6 and 6 |
Dump
Mouldboard width | 3355 mm and 3658 mm |
Mouldboard height | 152 mm and 660 mm |
Images
Sizes
8. Blade base | 1981 mm | 8. Blade base | 2489 mm |
1. Dimensional length | 8888 mm | 1. Dimensional length | 8433 mm |
2. Between tyres width | 2307 mm | 2. Between tyres width | 2413 mm |
3. Height to cab upper part | 3184 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 5243 mm | 4. Wheelbase | 5918 mm |
5. Rear ground clearance | 307 mm | 5. Rear ground clearance | 279 mm |
7. Dual axis wheelbase | 1250 mm | 7. Dual axis wheelbase | 1550 mm |