vs.

      New Holland F156.6 vs. Caterpillar 24M

      4 reasons to buy New Holland F156.6:

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 126 l/min and 550 l/min 77 % less or 424 l/min

      Circle

      Maximum radius outside left tyres 2520 mm and 3222 mm 22 % less or 702 mm
      Right maximum radius outside tyres 3210 mm and 3228 mm 1 % less or 18 mm

      18 reasons to buy Caterpillar 24M:

      Steerage

      Turn radius 12.4 m and 8250 m 100 % less or 8237.6 m

      Sizes

      Rear ground clearance 507 mm and 328 mm 35 % more or 179 mm
      Front part clearance 858 mm and 141 mm 84 % more or 717 mm

      Operation

      Hydraulic system fluid volume 264 l. and 185 l. 30 % more or 79 l.
      Each tandem case fluid volume 322 l. and 68 l. 79 % more or 254 l.
      Front axle standard operating weight 18761 kg and 4496 kg 76 % more or 14265 kg
      Rear axle standard operating weight 43695 kg and 9841 kg 77 % more or 33854 kg
      Front axle maximum operating weight 19927 kg and 5200 kg 74 % more or 14727 kg
      Rear axle maximum operating weight 46211 kg and 11500 kg 75 % more or 34711 kg
      Fuel Capacity 1326 l. and 275 l. 79 % more or 1051 l.

      Motor

      Effective speeds output 5-6 397.5 kW and 130.5 kW 67 % more or 267.0 kW
      Maximum power 397.5 kW and 130.5 kW 67 % more or 267.0 kW
      Displacement 18.1 l. and 5.9 l. 67 % more or 12.2 l.

      Gear box

      Maximum forward speed 43 km/h and 37.4 km/h 13 % more or 5.6 km/h
      Maximum reverse gear 41.2 km/h and 27.1 km/h 34 % more or 14.1 km/h

      Front Axle

      Clearance 858 mm and 646 mm 25 % more or 212 mm

      Dump

      Maximum cutting depth 657 mm and 500 mm 24 % more or 157 mm

      Circle

      Maximum lifting above ground level 634 mm and 480 mm 24 % more or 154 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 28 degrees and 25 degrees

      Sizes

      Blade base 2504 mm and 4048 mm
      Dual axis wheelbase 1544 mm and 2285 mm
      Height to cab upper part 3373 mm and 4352 mm
      Dimensional length 9975 mm and 14194 mm
      Between tyres width 2595 mm and 4280 mm
      Wheelbase 5983 mm and 10278 mm

      Operation

      Tyre size 17.5R25EM and 29.5-29 28PR
      Overall standard operating weight 14336 kg and 62456 kg
      Total maximum operating weight 16200 kg and 66138 kg

      Motor

      Cylinders number 6 and 6
      Model CNH 4-stroke cycle, naturally aspirated diesel engine and C18 ACERT

      Hydraulic system

      Overflow valve pressure 20000 kPa and 24150 kPa
      Type of pump Axial cam pump, variable displacement piston pump and variable displacement piston pump

      Gear box

      Transmission type powershift transmission and automatic, electronically controlled gear shifting under load
      Forward gears number 6 and 6
      Reverse gears number 3 and 3

      Front Axle

      Wheel tilt 21 degrees and 18 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Mouldboard width 3660 mm and 7315 mm
      Mouldboard height 152 mm and 1067 mm
      Mouldboard thickness 19 mm and 50 mm
      Left lateral displacement 645 mm and 870 mm
      Lateral right shift 755 mm and 1244 mm

      Circle

      Right shift 755 mm and 437 mm
      Left shift 645 mm and 804 mm

      Images

      Sizes

      7. Dual axis wheelbase 1544 mm 7. Dual axis wheelbase 2285 mm
      8. Blade base 2504 mm 8. Blade base 4048 mm
      1. Dimensional length 9975 mm 1. Dimensional length 14194 mm
      2. Between tyres width 2595 mm 2. Between tyres width 4280 mm
      3. Height to cab upper part 3373 mm 3. Height to cab upper part 4352 mm
      4. Wheelbase 5983 mm 4. Wheelbase 10278 mm
      5. Rear ground clearance 328 mm 5. Rear ground clearance 507 mm
      6. Front part clearance 141 mm 6. Front part clearance 858 mm